Summary of ISCOM 1024E
Page 1
Www.Raisecom.Com iscom 1024e user manual.
Page 2: Legal Notices
Legal notices raisecom technology co., ltd makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Raisecom technology co., ltd shall not be held liable for errors contained herein or dir...
Page 3: Contact Information
Java™ is a u.S. Trademark of sun microsystems, inc. Microsoft® is a u.S. Registered trademark of microsoft corporation. Windows nt® is a u.S. Registered trademark of microsoft corporation. Windows® 2000 is a u.S. Registered trademark of microsoft corporation. Windows® xp is a u.S. Registered tradema...
Page 4: Feedback
Feedback comments and questions about how the rcms2811 series devices work are welcomed. Please review the faq in the related manual, and if your question is not covered, send email by using the following web page: http://www.Raisecom.Com/en/xcontactus/contactus.Htm . If you have comments on the dev...
Page 5: Contents
Contents chapter 1 iscom 1024e overview ---------------------------------------------------------------- 1 1.1package --------------------------------------------------------------------------------------------------------------------------1 chapter 2 parameters -------------------------------------...
Page 6
Preface about this manual this manual introduces primary functions of the configuration management software for rc series products. Who should read this manual sales and marketing engineers, after service staff and telecommunication network design engineers could use this manual as a valuable refere...
Page 7
G.707 network node interface for the synchronous digital hierarchy (sdh) g.774 synchronous digital hierarchy (sdh) - management information model for the network element view g.781 synchronization layer functions g.783 characteristics of synchronous digital hierarchy (sdh) equipment functional block...
Page 8: Chapter 1
Www.Raisecom.Com user manual 1 chapter 1 iscom 1024e overview iscom 1024e is an ethernet switch with vlan and qos. It can provide 24x10/100mbps rj45 interfaces and support local craft terminal management through console, port-based vlan and 802.1q vlan, port-based qos, tag-based qos and tos-based qo...
Page 9: Chapter 2
Www.Raisecom.Com user manual 2 chapter 2 parameters 2.1 features: z 24x10/100mbps rj45 interface z it supports mdi or mdi-x z it supports console local management z bi-directional nx32kbps bandwidth management z port rate limiting, based on ingress and egress of each port, 8 levels z qos: support ie...
Page 10: Chapter 3
Www.Raisecom.Com user manual 3 chapter 3 mechanical structure and indicators the front panel of iscom1024e contains 24 10/100mbps rj45 interface, 1 console port and led. Z switch logo and type: iscom1024e z console management z 24 10/100mbps rj45 interface z 2 led sys and pwr led color state indicat...
Page 11
Www.Raisecom.Com user manual 4 rear panel provide 220v ac power as follows: 1.
Page 12: Chapter 4
Www.Raisecom.Com user manual 5 chapter 4 configuration and management 4.1 manual overview [1] overview z configure work mode for port z configure receive and send bandwidth z qos z configure port vlan or tag vlan z advanced function : age, fast-age, filter broadcast packets, igmp, loopback detection...
Page 13
Www.Raisecom.Com user manual 6 select the item through numeric key on this interface. 4.2.2 port setup select “1” to enter the screen as following in the main manual. 1. Modify setting press “m” to modify the setting including ： admin(e ： open ， d ： close) 、 auto(e ： auto negotiation ， d ： non auto ...
Page 14
Www.Raisecom.Com user manual 7 2. After modification, press “q” to quit and return main manual, press “y” to save, press “n” not to save. Note: when the auto negotiation is enabled, state of local port is associate with connected port, speed and duplex are invalid. Select the target port, after the ...
Page 15
Www.Raisecom.Com user manual 8 select ‘2’: set uplink based-port vlan select ‘3’: system will ask user to set vlan port manually select ‘4’: delete all the vlan note: iptv vlan will disappear if you set other port vlan 4.2.4 set 802.1q vlan note: port vlan should be deleted before you create 802.1q ...
Page 16
Www.Raisecom.Com user manual 9 select ‘2’ to modify vlan area, input ‘m’ to modify the menu of vlan area, select groupno: ‘0’ (iscom 1024e can only support 0~31 vlan groups. Such as for the first vlan, id is 0). Select add or remove port, then select port id, enter ‘q’ to save. For example: add port...
Page 17
Www.Raisecom.Com user manual 10 select ‘4’ to set tag port and pvid note: when the vlan area is created, pvid will be the same as van id, it is suggest that user keep the default value. User can select ‘tag’ or ‘untag’ according to the requirement. Set port 1 to tag select ‘y’ to save it is displaye...
Page 18
Www.Raisecom.Com user manual 11 select ‘1’ to set flow scale select ‘2’ to set priority for each port select ‘3’ set ieee802.1p service select ‘4’ set tos/deffserv based priority select ‘5’ back to previous menu note: priority for qos is cos, qos and port. 4.2.6 advanced configuration select ‘5. Adv...
Page 19
Www.Raisecom.Com user manual 12 note: enable broadcast storm filtering, p ort will stop receiving when the first 64 packets have been received, but it will receive packet again after 800s. Age time is less than 300s, fast age time is 12s. 4.2.6.1 loopback detection select ‘2’ in advanced menu to ent...
Page 20
Www.Raisecom.Com user manual 13 4.2.6.2 link aggregation select ‘4’ in advanced menu to set link aggregation. Iscom1024e support 6 trunk groups,there can be 4 ports in each trunk group. For example: enable trunk 1, disable trunk 2~6 e: enable trunk d: disable trunk 4.2.6.3 mirror select port no?(1-2...
Page 21
Www.Raisecom.Com user manual 14 tx miror port (1-24,q)6 select a port, which output is mirrored. Enable/disble tx mirror(e/d)? E whether mirror output of port tx miror port (1-24,q) press ‘q’ if you do not select the port which output is mirrored. 4.2.7 system configuration select ‘6. System setup’ ...
Page 22: Chapter 5
Www.Raisecom.Com user manual 15 chapter 5 network connection 5.1 connect iscom 1024e z use utp3 or utp5 to connect 10baset with iscom 1024e z use utp5 to connect 100baset with iscom 1024e z the cable should not more than 100m in ieee stander. 5.2 connect iscom1024e with other ethernet switch or hub ...
Page 23: Chapter 6
Www.Raisecom.Com user manual 16 chapter 6 p laced iscom1024e iscom1024 can be placed on a desk or other plane. 6.1 placed iscom1024e on a desk put iscom1024e on a desk, connect a cable with iscom1024e.
Page 24: Chapter 7
Chapter 7 trouble shooting 7.1 how to resolve link led off the possible reasons are following: z the power supply is off z the type of cable is not right one z physical interface of switch has some problem z environment, such as building 7.2 q & a 1. Computer a can access computer b through ethernet...
Page 25: Chapter 8
Chapter 8 cable a there are two kinds of cable z straight-through z cross-over 1) straight through cable (the straight through cable for 100m or 1000m are identical.) side 1 1 1 side 2 side 1 side 2 3 5 7 4 6 2 8 3 5 7 4 6 2 8 1 = white/orange 7 = white/brown 1 = white/orange 2 = orange 3 = white/gr...
Page 26
Manage the switch through pc. The console interface of iscom1024e is in the form of rj-45. The rj-45 connector and jack and the corresponding pin number is shown in the figure below. Rj-45 connector rj-45 jack the corresponding pin function definition of iscom1024e console interface is shown in the ...
Page 27
5 gnd 2) console interface connecting pattern and parameter setup the connecting of iscom1024e console interface and pc serial port is shown in the figure below. Rxd txd gnd rxd txd gnd pc serial pot console 3 2 5 6 3 4 、 5.