Raisecom ISCOM2852 User Manual - Chapter 4
www.raisecom.com
User Manual
8
Chapter 4
Installation and Application
4.1 Device model
The device models currently provided are:
Product Model
Description
ISCOM2852-AC/S
Layer-2 switch with 48 100M RJ-45 interfaces, 4 1000M SFP
interfaces and single AC 220V power supply
ISCOM2852-DC/S
Layer-2 switch with 48 100M RJ-45 interfaces, 4 1000M SFP
interfaces and single DC -48V power supply
ISCOM2852-AC/D
Layer-2 switch with 48 100M RJ-45 interfaces, 4 1000M SFP
interfaces and double AC 220V power supply.
ISCOM2852-DC/D
Layer-2 switch with 48 100M RJ-45 interfaces, 4 1000M SFP
interfaces and double DC -48V power supply.
4.2 Device installation
4.2.1 Environment requirement
There are heat exhaust outlets on both sides of ISCOM2852 switch. Please leave space on both sides
of the switch to keep air flow unblocked. Please make sure the outlets are not blocked.
4.2.2 Install the device on to a rack
To set the switch firmly into a rack, please fix the installation tray to the switch using the four screws
come with the device and fasten the installation handle on to the rack.
4.2.3 Grounding
To ensure the safety of the device and the operator, please make sure that the grounding terminal is
well connected to the earth.
4.3 The connection of the switch
4.3.1 Connect to console
ISCOM2852 switch provides a RS-232 interface in the form of RJ-45 as the CONSOLE interface.
After connecting the CONSOLE interface of ISCOM2852 switch to the serial port on the PC using
the provided cable, users can configure and manage the switch through PC.