1350 phillip murray avenue oshawa on, canada l1j 6z9 operator's manual original operating instructions vortex ™ 33cc power ice auger nitro ™ 43cc power ice auger black ice ™ 43cc power ice auger tundra ™ 51cc power ice auger endura ™ 51cc power ice auger visit us at www.Rapala.Ca gas/oil ratio 50:1 ...
Visit us at www.Rapala.Ca 2 operator's manual rapala ® power ice auger introduction thank you for purchasing a rapala® power ice auger from normark inc. We have worked to ensure that this ice auger meets high standards for usability and durability. With proper care, your ice auger will provide you m...
3 visit us at www.Rapala.Ca operator's manual rapala ® power ice auger warnings and safety precautions operator’s responsibility accurate, safe and effective use of this unit is the operator’s responsibility. • read and follow all safety instructions. • carefully follow all assembly instructions. • ...
Visit us at www.Rapala.Ca 4 operator's manual rapala ® power ice auger important safety precautions: • the ice blades are very sharp. Use extreme caution when drilling a hole or replacing the blades. Put blade guard on after each use. • do not carry the unit between holes with the engine running. • ...
5 visit us at www.Rapala.Ca operator's manual rapala ® power ice auger • never operate the engine without the muffler guard in place. • always make sure the exhaust pipe is free of foreign objects. • the engine exhaust becomes very hot during operation. Keep engine at least three feet away from buil...
Visit us at www.Rapala.Ca 6 operator's manual rapala ® power ice auger (service, continued from page 5) when servicing or repairing the engine, do not tip the engine over or up unless specifically instructed to do so in this manual. Service and repair procedures can be done with the engine in an upr...
7 visit us at www.Rapala.Ca operator's manual rapala ® power ice auger caution avoid injury! Always handle fuel in a well ventilated area, outdoors, away from flames or sparks. Avoid injury! Do not start engine if fuel is spilled. Wipe off excess fuel and allow to dry. Remove engine from area to avo...
Visit us at www.Rapala.Ca 8 operator's manual rapala ® power ice auger (cold engine start, continued from page 7) 2. Prime unit until primer tube is filled with gas. Note: when using the primer bulb, allow the bulb to return completely to its original position between pushes. 3. Move choke lever to ...
9 visit us at www.Rapala.Ca operator's manual rapala ® power ice auger caution avoid injury! To avoid injury or death, never siphon fuel by mouth. Avoid injury! Never store ice auger with fuel in the gas tank inside an enclosed area or building. Maintenance item every 8 hours (daily) every 20 hours ...
Visit us at www.Rapala.Ca 10 operator's manual rapala ® power ice auger transporting your ice auger 1. Never transport engine inside an enclosed space or vehicle. Fuel or fuel vapors may ignite causing serious injury or death. 2. If fuel is present in the fuel tank, transport in an open vehicle in a...
11 visit us at www.Rapala.Ca operator's manual rapala ® power ice auger ordering repair parts parts may be obtained from the store where your auger was purchased or direct from the factory. To order from the factory, call, e-mail, or order online at www.Rapala.Ca: normark inc, 1350 murray avenue osh...
Visit us at www.Rapala.Ca 12 operator's manual rapala ® power ice auger ice auger powerheads warranty terms and conditions product warranty: 2-year limited warranty normark inc., warrants the listed rapala® power augers under a two-year limited warranty to be free from defects in materials or workma...
13 visit us at www.Rapala.Ca operator's manual rapala ® power ice auger federal emission control warranty statement your warranty rights and obligations the united states environmental protection agency (epa), to- gether with ardisam, inc. (ardisam), are pleased to explain the emission control syste...
Visit us at www.Rapala.Ca 14 operator's manual rapala ® power ice auger (1) designed, built and equipped so as to conform with all applicable regulations adopted by the epa pursuant to their respective authority, and (2) free from defects in materials and workmanship which, at any time during the ec...
