Usb serial converter (micro usb b type) 2014.02 rev. 1.01.
Contents 1.Introduction ................................................................ 2 1-1. Overview ............................................................................... 2 1-2. Package contents ................................................................. 2 1-3. System requirement...
1.Introduction 1-1. Overview ● rex-usb60mb is a usb to serial converter. Compatible with universal serial bus specifications rev. 1.1. ● up to 230.4kbps data transfer rate. ●micro usb (b type male) easy to connect android tablet or smart phone. ●power/transmit/receive led indicators for monitoring c...
1-4. Rs-232c connector pin assignment the pin assignment of the connector is below: this db9pin connector is compatible with ansi/eia/tia-574 specifications. 1 2 3 4 5 pin# signal name direction dte – dce. Meaning 1 dcd data carrier detected 2 rxd data 3 txd ---> transmitted data 4 dtr ---> data ter...
2. Installation and operation on android os please make sure that the android tablet meets the following specifications: • usb port is micro-usb b or ab • android os version is 3.2, 4.0 or later • usb host mode is available 2-1. Installation of usb60term application download the terminal application...
2-2. How to operate usb60term when the usb60term starts, the below window will show: 1 status of detecting usb serial converter display the status of detecting usb serial converter, this status shows “connected” or “not connected”. 2 “to setting” button the button for changing serial parameter. Afte...
How to send data when tapping the send data field, the software keyboard shows up. Then, enter the send data. You can set multiple lines with a new-line. After entering the send data, tap the “send” button or the “send with cr+lf” button at the upper-right of screen. Then, the send data will be tran...
How to change serial parameter after tapping the “to setting” button, you can change serial parameter values. When edit is ready, the “to setting” button will be changed to the “configure” button. And the back-ground color of serial parameter values will be changed in light blue. Baud rate stop bit ...
3. Specifications product name rex-usb60mb serial input/output level rs-232c level usb specification usb(universal serial bus) specifications rev. 1.1 connector usb ：micro-usb b male rs-232c：d-sub9 male (with anchor [#4-40]) number of i/o ports 1 port unit dimensions 3.35[l] x 1.1[w] x 0.43[h] in (8...
9 9.
