SABINE NAVIGATOR NAV8802-S Dimensions

Download

2008 Pro Audio Binder-Arch-Specs-080218.indd - ks

Sabine, Inc. ♦ 13301 NW US Highway 441 ♦ Alachua, FL 32615-8544 ♦ (386) 418-2000 ♦ Fax: (386) 418-2001 ♦ Sabine.com

ARCHITECTS’ and ENGINEERS’ SPECIFICATION

2008

The loudspeaker controller/matrix mixer/parametric

equalizer/automatic feedback controller/compressor/limiter/

delay/crossover/signal router shall be an eight input / eight output

digital signal processor, programmable with provided Windows

software, Navigator Remote, including linkable functions and

remote programming. The unit shall also be accessable via

programmable IP address. The unit shall automatically sense

feedback and determine its pitch, then assign a digital notch

filter to the resonating frequency to automatically eliminate

the feedback. It shall effectively distinguish between music

and feedback and shall be operational during the program.

The product shall use five types of user-selectable filters:

parametric, high-shelf, low shelf, fixed FBX or dynamic FBX.

The user controls the parametric and shelving filters; the fixed

FBX filters, controlled automatically, remain set on the initial

feedback frequencies, and the dynamic FBX filters shall be

automatically reassigned new frequencies as feedback occurs

during the program. The NAV8802 shall also function as a

eight-band parametric equalizer, full-featured compressor/

limiter, multi-setting crossover, and digital delay for speaker

alignment.

The back panel will have 3-pin Euroblock connectors

for each input and output; RJ45 Ethernet connector; power

connector with bulti-in fuse holder.

The following performance criteria shall be met:

FBX/PARAMETRIC FILTERS — Eight independent

digital notch filters controlled automatically or parametrically

from 20 Hz to 20 kHz, each switchable between FBX fixed

filters, FBX dynamic filters, shelving filters, and parametric

filters. High and low shelf filters: user-controllable cutoff points

between 20 Hz and 20 kHz, and 6 or 12 dB/octave roll-off.

parametric filter depth: user-controllable in 1 dB steps from +15

dB to -30 dB (parametric mode), 3 dB steps from 0 dB to -40

dB (FBX mode), maximum automatic depth adjustable from

-6 to -40 dB. Filter width: user-controllable from 2.50 octave

to .02 octave (parametric), 1.0 to .02 oct. (FBX); constant Q

(filter skirts do not widen as filters get deeper).

Resolution: 1 Hz from 20 Hz to 20 kHz in FBX and

parametric mode. Time required to find and eliminate feedback:

user-controllable from 0.1 seconds to 5 seconds (typically

0.3 seconds). Total number of combined filters active: user

selectable, 0-8 per output and 0-8 per input. Filters controllable

via table or graphic interface.

CROSSOVER: Two filters per output; Bessel, Linkwitz-

Reily, or Butterworth filters; 12, 24, 36, 48 dB/octave slopes.

Multiple presets and graphic editing.

COMPRESSOR/LIMITER — Threshold: +20dBu

to -20dBu in 0.5 dB steps (independently adjustable for

compressor & limiter

). Ratio: 1:1 through infinity. Knee: soft

to hard, in 40 steps. Attack: 0.3 to 99 mSec in 1 mSec steps.

NAVIGATOR NAV8802-S System Processor

Release: .05 to 100 msec. in .05 sec steps

. Peak limits: -20

dBu to 32 dBu in .05 dB steps.

DIGITAL DELAY — 1.47 mSec to 650 mSec in 20

microsecond steps. Edit in milliseconds, feet, or meters.

MIXER/ROUTER — All inputs patchable to all outputs;

mixer with levels levels for all inputs/outputs

PASSWORD CONFIGURATION — 4 levels

SAVE & RECALL CONFIGURATIONS — 30

user defined, 1 factory default, 1 most recent front panel

configuration (power down save).

INPUT/OUTPUT — Input impedance: balanced 10K

Ohms, PIN 2 high. Output impedance: balanced 50 Ohms

nominal, PIN 2 high. Input/output maximum signal levels:

balanced +20 dBu peak. Output load: 600 Ohms balanced.

Bypass: true power-off bypass.

PERFORMANCE — Frequency response: 20 Hz to 20

kHz, 0.1 dB @+20 dBu. Dynamic range: >115 dB. Digital

resolution: 24-bit, 96 KHz.

POWER — 50/60 Hz; 120V or 230V; 18W.

DIMENSIONS — 1-U rack mount; 19” x 1.75” x 8” (483

x 44 x 203 mm); Weight: 13.2 lb. (6 kg).

The unit shall be the Sabine NAV8802-S Navigator System

Processor.

Options: NAV8802-S-R: Ready for connection via

CAT-5 cable to NAVRC100 Wall-mounted Remote Control;

NAV8802-S-M: Includes Mic Preamp; NAV8802-S-MR:

Includes Mic Preamp and Remote Control; NAV8802-S-D:

Includes Digital I/O on DB25 connector; NAV8802-S-MDR:

Includes all three options; NAV8802-S-MD: Includes Mic

Preamps and Digital I/O; NAV8802-S-DR: Includes Digital

I/O and Remote Control.