Summary of LRX2
Page 2: Installing The Software
2 getting started with the sadie lrx2 installing the software before you connect your lrx2 to the computer you will need to install the sadie software. 1. You will have been provided with a cd-rom containing the software installer. Place the disk in the cd-rom drive. It should auto-run and a lrx ins...
Page 3
3 more detailed instructions on operation of the sadie software are included with the software itself, and are available from the help menu. A pdf of the help file is included on the cd-rom provided. Note that this also includes a troubleshooting and faq section at the end of the manual. Printed cop...
Page 4
4 slither pin-outs analogue and mic / line 1 channel 8 hot 14 channel 8 cold 2 channel 8 ground 15 channel 7 hot 3 channel 7 cold 16 channel 7 ground 4 channel 6 hot 17 channel 6 cold 5 channel 6 ground 18 channel 5 hot 6 channel 5 cold 19 channel 5 ground 7 channel 4 hot 20 channel 4 cold 8 channel...
Page 5
5 aes/ebu digital 1 channel 7+8 out hot 14 channel 7+8 out cold 2 channel 7+8 out ground 15 channel 5+6 out hot 3 channel 5+6 out cold 16 channel 5+6 out ground 4 channel 3+4 out hot 17 channel 3+4 out cold 5 channel 3+4 out ground 18 channel 1+2 out hot 6 channel 1+2 out cold 19 channel 1+2 out gro...
Page 6
6 madi analogue level jumpers on the analogue line input and output slithers, the operating level can be chosen, for each input and output individually if required, by changing the setting of some jumpers. With the card components-up, 2 x 25way connectors and face plate to the right, just to the lef...
Page 7: Lrx2 Panel Quick Start
7 lrx2 panel quick start faders can be changed to operate on a different bank with the bank select button, or for different functions - output faders, pan or input level (mic inputs only) - with the button below the bank button. Record enables operate on the playlist stream of the appropriate number...
Page 8
8 phantom power is enabled on microphone inputs by pressing the small “lightning” icon in the left side of the edl stream. Input select inputs are automatically configured based on the input slithers in the system, thus if you had for instance a mic card in slot 1 and an aes card in slot 2 then inpu...
Page 9: Performance Considerations
9 mtr software the mtr software is a simplified single pane interface for recording and editing. Main differences from the full sadie are currently: 1 stream per input is created. There is no configurable mixer – each stream is routed to its respective physical output. The top pair of streams is a m...
Page 10: Maximum Record Time
10 it is quite normal that a laptop that is reserved for exclusive sadie use will perform better than the same spec pc that is running many other email, word processor, utilities, anti virus software and other audio software applications. Installing other applications (even if they are not running) ...
Page 11: Sadie Lrx2 Registration
11 sadie lrx2 registration all fields with a star (*) are mandatory. *name: company: address: *country: phone number: *email address: *serial number of product: *make and model of computer to be installed on: *basic computer description (processor speed, amount of ram, os): your main work area: are ...