Safeland SAFE-1000N User Manual - page 20

Summary of SAFE-1000N

  • Page 2

    Table of contents section page 1.1 program start.............................................................................................................................................................................................................................1 1.2 program exit ...............

  • Page 3

    6.1 introduction to panorama search ...................................................................................................................................................................... 34 6.2 image print..................................................................................

  • Page 4

    1. System start and shut down 1 1.1 program start after installing the safe-dvr program, it will automatically run after rebooting the system. The program will be registered on the ‘start up’ program and ‘desktop’. 1.2 program exit when exiting the program, please exit by pressing the [exit] button....

  • Page 5

    1. System start and shut down 2 1 after exiting the safe-dvr program, press [shutdown] icon. At the shutdown dialog box, select [shutdown] and press the [ok] button. 2 within a minute, the system will be completely shut down. 1.4 shell mode safe-dvr provides the shell mode that provides compulsory f...

  • Page 6

    1. System start and shut down 3 1 open the windows explorer. 2 start the safe-dvr program. 3 when user starts the [tool box], below window will appear. In [tool box], user can 1. See working programs through ‘task manager’. 2. Make/modify the network information of a safe-dvr including ip through ‘n...

  • Page 7

    1. System start and shut down 4 to remove the icon, click the icon and press [delete] key on a keyboard. 6 finish/restart the system. 7 uninstall the program. 8 command window 9 user can check the ip. 1.5 ez update ez update keeps you have the most newly updated safe-dvr program. User should operate...

  • Page 8

    1. System start and shut down 5 2 below window will appear. A class server administrator can appoint classes. For example, if you are operating a communication server (cs), you must select svns class. B product select a model among 1000, 1800, 2000, 2200, 4000 and 4200. For more information on the v...

  • Page 9

    1. System start and shut down 6 4 update is proceeding. 5 update is completed. Press [ok] button to finish the update process. When you start the safe- dvr afterward, the updated information will be automatically applied. * ez update server is not registered at first. Please contact to a selling age...

  • Page 10

    2. Setup 7 2.1 setup screen [ login screen ] [ setup screen ] 1 press [setup] button on the monitoring screen. The login window will appear. 2 select [admin] on the [user name] box and enter the password. (the default password is ‘1’) then press [ok] button. The setup screen will appear. Note: you c...

  • Page 11

    2. Setup 8 2.2 setup menu bar the setup menu bar consists of 11 setting buttons, a cancel button and a confirm button..

  • Page 12

    2. Setup 9 2.3 camera setup the camera settings are as following. Tip! 1. In case of [recording] option, left click of the character “recording” after changing just one camera setting drives the change of all camera setting. It is very convenient option when user wants to apply the change to all cam...

  • Page 13

    2. Setup 10 2.4 record speed setup set the recording schedules in this menu. Tip! 1. Capture frame : the number of frames when dvr card captures input signal from a camera. So, recording or network frames will be always set less than capture frames. 2. Recording frame : the number of frames for dvr ...

  • Page 14

    2. Setup 11 2.5 record schedule setup set the recording schedules for each camera in this menu. Tip! 1. You can select some cameras at the same time by clicking camera button with pushing [ctrl] key on your keyboard. Settings will be identically applied to the selected cameras. 2. Clicking day butto...

  • Page 15

    2. Setup 12 2.6 motion setup set the motion detection and sensitivity of each camera. User can also set the brightness and contrast of the camera..

  • Page 16

    2. Setup 13 2.7 av monitor set rotation option and display camera on av monitor when especially using out monitor instead of pc monitor..

  • Page 17

    2. Setup 14 2.8 sensor & alarm setup set the sensor and alarm for better monitoring. The sensor will only activate when the sensor schedule is set. The alarm will activate at sensor and motion recording mode. [ sensor setup ] [ alarm setup ] 1 one sensor can link with 3 cameras. 2 one camera can lin...

  • Page 18

    2. Setup 15 2.9 audio setup user can select cameras that will link with audio channels. To record the sound with the recording image, select the cameras and turn the audios [on]. Tip! You cannot use audio option on the surveillance screen unless you set at least 1 channel audio as “on”..

  • Page 19

    2. Setup 16 2.10 account setup admin user can add/modify/delete an id and give it an authority for safe-dvr functions. Previously made ids are on the left list and add/modify/delete for an id is made on the right menu. Only admin user can do the account setup. [authority] selected id has an authorit...

  • Page 20

    2. Setup 17 8. Safe mode: an authority for access in safe mode. (safe mode authority is only given to one id.) 9. Remote search : an authority for access in m-client 10.Setup:an authority for remote access to the camera channels unit as like as below picture. Tip! If you delete the communication use...

  • Page 21

    2. Setup 18 tcp/ip permits the access through internet to a safe-dvr. Modem permit the access through a modem. Web server permit the image transmission using an web browser. Users user can see connected user ids, ip and functions in use. User also can disconnect them with [disconnect] button. User c...

  • Page 22

    2. Setup 19 3. If you changed stream port you have to change the html file in the safe1000n and safe1800 folder(c:₩safe1800₩html₩index.Html). Please refer to the below picture. 2.12 diet mode setup user can minimize the monitoring screen using the diet mode function. Remote service turns on access t...

  • Page 23

    2. Setup 20 * no use: do not use this mode. Always on top always puts the monitoring screen on top. Always recording always record images. Motion recording use motion recording on diet mode. Sensor recording use sensor recording on diet mode. Right click on the diet mode screen to see the menu. [die...

  • Page 24

    2. Setup 21 2.13 etc setup set various functions on this menu..

  • Page 25

    2. Setup 22 power-off option there are 3 types of power options. Exit to window: exit to window when the safe-dvr program is over. Safe-dvr system restart: restart the safe-dvr system when the safe-dvr program is over. Safe-dvr power off: power off the safe-dvr system when the safe-dvr program is ov...

  • Page 26

    2. Setup 23 user can select a cd-writer program as below. 1 press ‘search’ at [cd-rw select]. 2 a window will pop up after pressing the [search] button. You can press [search] on this window to find the program file you wan t. 3 when the search is over, press [ok] to end the setting. 4 go to the mon...

  • Page 27

    2. Setup 24 to use. . 2.15 confirm & cancel confirm save all settings and exits the program cancel cancel all settings and exits the program.

  • Page 28

    3. Surveillance 25 3.1 introduction to surveillance tip! When using safe-dvrx-1000, user can use light on/off function in the [etc] button. In case of using this function, you can control the light connected with safe-dvrx-1000. Please set audio option on the setup mode to use audio in surveillance ...

  • Page 29

    3. Surveillance 26 1 camera name 2 recording status 3.2 recording status [display recording status] audio use a no recording no signature continuous recording c motion recording m sensor recording s 3.3 safe-dvr information window you can see the version and kind of the safe-dvr you have, by pressin...

  • Page 30

    3. Surveillance 27 in the log2 you can find setup information like as camera, frame, schedule, motion, audio, network, authority and etc..

  • Page 31

    3. Surveillance 28 3.5 connected user status you can check the connected user state from remote sites by pressing [ctrl+u]..

  • Page 32

    4. Search 29 4.1 search screen formation 4.2 play controls you can control playing by using play control buttons..

  • Page 33

    4. Search 30 4.3 video search follow these steps to search and find video files. (1) select a date to search using calendar.(the color of the date with recorded images are in blue) (2) select a camera to search (3) select a recording mode for filtering. (all, always, motion, sensor) (4) select a fil...

  • Page 34

    5. Multi - search 31 5.1 introduction to multi-search you can search the images of not only 1 channel but for up to 4 channels simultaneously. 5.2 multi - search follow these steps to use the multi search function. (1) select a date to search using calendar. (the date with recorded images turns to b...

  • Page 35

    5. Multi - search 32 (5) after selecting date, time and channel, press [load] button. (6) selected video data will be appeared like next picture. How to play is same with search screen. 5.3 enlarge mode most of button functions are same..

  • Page 36

    5. Multi - search 33 5.4 bookmark this screen will be displayed when you click bookmark button in multisearch. Bookmark is useful when you want to remember a special point during multisearch process. After clicking bookmark button, press ‘add’ button and enter the information on the space. Later, ju...

  • Page 37

    6. Panorama search 34 6.1 introduction to panorama search panorama is 1 channel - search for more specific playback. It is convenient to use panorama search for specific playback because it shows total 18 successive images in a screen and offers many functions, such as image adjustment, image print,...

  • Page 38

    6. Panorama search 35 6.2 image print in the panorama mode, user can print desires frames by his/her preference in various mode – 1x2, 2x4, 3x6. First, click frames user want to print out in the panorama search screen. Then the selected frames are outlined with blue. After that, press [print] button...

  • Page 39

    6. Panorama search 36 6.3 panorama enlarged-screen you can also use the zoom in function in the panorama screen. You can see the panorama search screen in full screen mode and go back to original screen..

  • Page 40

    6. Panorama search 37 6.4 image adjustment 1 blur soften the selected image. 2 sharpen focus blurry images by increasing the contrast of adjacent pixels. 3 edge detect focus the color boundary line. 4 embossing make the image appear raised or stamped by converting its fill color to gray and tracing ...

  • Page 41

    6. Panorama search 38 10 closing soften the boundary line and remove the little holes. 11 brightness / contrast control the brightness and contrast of images. 6.5 smart search smart search can detect movements in consecutive frames. This function is useful for lots of recorded frames of zones with l...

  • Page 42

    7. File backup 39 7.1 introduction to backup user can back up recorded video to a cd-rw, an external hdd, and a dvd. Note to back up recorded video to cd-rw, any kind of cd writing program will be needed – ahead nero, cd creator or etc. Please refer to its manual for further information. 1 backup de...

  • Page 43

    7. File backup 40 8 backup media status show user the list of video that the selected backup media currently has. 9 file list show user the list of video fit to option 5,6,7. User can select video to back up from this list. 10 file backup allow user to back up selected video to the associated backup...

  • Page 44

    7. File backup 41 6 press [file backup]. In a while, backup process will be completed. To exit to monitoring screen, press [exit] button after backup. To use hdd or dvd for backup, user must specify the [drive]. If the media is not formatted please format that using [hdd format] or [dvd format] butt...

  • Page 45

    7. File backup 42 7.4 file saving structure of safe-dvr for backup user is able to get the system to back-up as dvd or cd-rw type. In this case, hardware for the recording time should be setup and installed by software.( for example, user need to setup cd-rw hardware and install the software, ‘easy ...

  • Page 46

    8. Appendix 1 43 8.1 open protocol open protocol (user setup) is a function which enables user to customize and edit p/t/z cameras’ protocols. It will make the user feel safe when he/she gets new p/t/z cameras which is not embedded in safe-dvr. . 8.2 starting open protocol user can start the open pr...

  • Page 47

    8. Appendix 1 44 3 command info user must input each command values. Please note that user should calculate each value with the p/t/z camera manual. 4 camera id select a p/t/z camera id to work for. To set multiple cameras up, user must input each different value for each camera id. (ex: when there ...

  • Page 48

    8. Appendix 1 45 4. Select the values for serial communication. (the most common values is 9600 / 8 / no / 1.)) 5. Select a camera id. (4 channel safe-dvr user checks 1~4 camera ids). In this example, we will check camera no.1 6. Enter the calculated command. 7. Each p/t/z camera has its own protoco...

  • Page 49

    8. Appendix 1 46 8.5 hexademical numeric system user can calculate hexadecimal numbers using a calculator provided with window. 1. Select [start] → [program] → [accessories] → [calculator]. 2. Select [view] -> [scientific] to expand the default calculator. 3. Check [hex] and [byte] to calculate hexa...

  • Page 50

    9. Appendix 2 47 9.1 safe-dvr web wervice web service of safe-dvr is for remote monitoring without program in user’s pc. It properly works under internet explorer ver. 5.0 over. Type the safe-dvr ip in the address window of internet explorer and below window will appear. 9.2 web viewer web viewer is...

  • Page 51

    9. Appendix 2 48 a show the images of camera no. 1 ~ 4. B control the p/t/z camera – pan/tilt/zoom and auto panning. C control the zoom of selected camera. To use this function, auto zoom lens should be installed first. D control the focus of selected camera. To use this function, auto zoom lens sho...

  • Page 52

    9. Appendix 2 49 10.1 tcp / ip filtering what’s ‘tcp/ip filtering’? ‘tcp/ip filtering’ function invests all packets coming into a computer and only accept authorized of them. (it’s only for a dvr system, not for a pc.) 10.2 tcp/ip setup for ‘tcp/ip filtering’ 1. Right-click [my network places] icon ...

  • Page 53

    9. Appendix 2 50 3. In [general] tab (in case you selected ‘local area connection’) or another network tab (in case you selected another connection’ in previous step), select [internet protocol (tcp/ip)] and click [properties]. 4. Click [advanced]..

  • Page 54

    9. Appendix 2 51 5. In [option] tab, select [tcp/ip filtering] and click [properties]..

  • Page 55

    9. Appendix 2 52 6. Follow one of below steps. 1) if you want to use [tcp/ip filtering] over the entire adapters, select [enable tcp/ip filtering (all adapters)]. 2) if you don’t want, deselect [enable tcp/ip filtering (all adapters)]. 7. Set [tcp ports], [udp ports] and [ip protocols] for allowed t...