Sagitter Halfpar 24x3W RGB/FCSG HALFPAR24 User Manual

Summary of Halfpar 24x3W RGB/FCSG HALFPAR24

  • Page 1

    Halfpar 24x3w rgb/fc sg halfpar24 manuale utente user manual.

  • Page 2

    2 indice: 1. Introduzione p. 3 2. Istruzioni di sicurezza p. 4 3. Apertura confezione e controllo p. 6 4. Installazione ed accensione p. 7 5. Istruzioni per l'uso p. 9 6. Manutenzione p. 11 7. Specifiche tecniche p. 11 index: 1. Introduction p. 12 2. Safety instructions p. 13 3. Opening and control ...

  • Page 3

    3 1. Introduzione grazie per avere scelto un nostro prodotto! Vi preghiamo di fare riferimento alle istruzioni e alle avvertenze contenute nel presente manuale per l’utilizzo del dispositivo e di conservarlo per future consultazioni. Il presente manuale contiene informazioni riguardanti l’installazi...

  • Page 4

    4 2. Istruzioni di sicurezza attenzione! Questo prodotto non è adatto ad un uso domestico. Leggere il presente manuale prima di installare e dare corrente all’apparecchiatura, seguire le precauzioni di sicurezza elencate di seguito ed osservare tutti gli avvertimenti indicati nel presente manuale e ...

  • Page 5

    5 classe di protezione ip20 il dispositivo è protetto contro la penetrazione di corpi solidi di dimensioni superiori a 12 mm (0.47”) di diametro (prima cifra 2), ma non contro la caduta di gocce d’acqua, pioggia, schizzi o getti d’acqua (seconda cifra 0). Usare solo in ambienti asciutti. Usare solo ...

  • Page 6

    6 3. Apertura della confezione e controllo aprire con cura la confezione, verificare il contenuto e assicurarsi che tutte le parti siano presenti e siano in buone condizioni. Nel caso in cui alcune parti non siano presenti o siano danneggiate, contattare immediatamente il proprio fornitore e conserv...

  • Page 7

    7 4. - installazione ed accensione 4.1 - installazione prodotto - non scuotere l'apparecchio. Evitare l'utilizzo di forza eccessiva durante le operazioni di installazione o fissaggio dell'unità. - l'unità può essere installata a pavimento in appoggio sugli appositi piedini in gomma, a parete, a soff...

  • Page 8

    8 4.2 - collegamento alla linea di alimentazione il dispositivo deve essere collegato ad un sistema di alimentazione dotato di un’efficiente messa a terra. Inoltre, si consiglia di proteggere le linee di alimentazione dei prodotti dai contatti indiretti e/o da cortocircuiti verso massa utilizzando i...

  • Page 9

    9 5. - istruzioni per l'utilizzo 5.1 - mappa del menu' addr d001 – a512 3-ch indirizzo dmx e settaggio numero canali 6-ch 7-ch soud su00 … su31 modalità sound con regolazione sensibilità microfonica auto auto modalità automatica pr pr01 … fs00 … fs99 12 macro colori preregistrate con regolazione str...

  • Page 10

    10 5.3 – modalita' dmx modalità 3 canali canale valore funzione 1 000 – 255 rosso 2 000 – 255 verde 3 000 – 255 blu modalità 6 canali canale valore funzione 1 000 – 255 master dimmer 2 000 – 255 rosso 3 000 – 255 verde 4 000 – 255 blu 5 000 – 009 non usato 010 – 255 modalità sound 6 000 – 255 non us...

  • Page 11

    11 6. - manutenzione per garantire ottime prestazioni, l’apparecchio deve essere pulito frequentemente. Scollegare l’apparecchio della corrente e lasciarlo raffreddare per almeno 35 minuti onde evitare il rischio di bruciature. Utilizzare un aspirapolvere o compressore e una spazzola morbida o un pa...

  • Page 12

    12 1. - introduction thank you for choosing one of our products! Please refer to the instructions and warnings contained in this user manual, please retain it for future reference. This manual contains information about the installation and use of the device. The information contained in this public...

  • Page 13

    13 2. - safety instructions caution! This product is not suitable for household illumination. Please read this manual before installing and applying power to the equipment, follow the safety precautions listed below and observe all warnings in this manual and printed on. Please contact a proel distr...

  • Page 14

    14 ip20 protection rating the device is protected against the penetration of solid bodies larger than 12 mm (0,47 ") in diameter (first digit 2), but not against dripping water, rain, splashes or jets of water (second digit 0). Use only in dry areas. Inside use only. Do not expose the equipment to r...

  • Page 15

    15 3. - opening and control carefully open the package, check the content and make sure that all the parts are present and are in good condition. In cases where some parts are not present or are damaged, immediately contact your supplier and retain the packaging for verification. Warning! If the pro...

  • Page 16

    16 4. - installation and switch on 4.1 - product installation - do not shake the device. Avoid the use of too much force during installation or unit fixing. - the unit can be installed on the floor resting on the rubber feet, on the wall, ceiling or on a truss. Warning! It's required the mounting of...

  • Page 17

    17 4.2 - connection to the mains the device must be connected to a power supply system with a proper earth system. Moreover, it is recommended to protect power supply lines of the products from indirect contact and / or shorting to earth by using appropriately sized anti electrical shock switch. The...

  • Page 18

    18 5. - setup 5.1 – menu addr d001 – a512 3-ch dmx address with channel mode setting 6-ch 7-ch soud su00 … su31 sound mode with sensibility regulation auto auto auto mode pr pr01 … fs00 … fs99 12 pre-recorded color macros pr02 … pr07 sp01 … spfl fs00 … fs99 pre-recorded programs with adjustable spee...

  • Page 19

    19 5.3 – dmx mode 3 channels mode channel value function 1 000 – 255 red 2 000 – 255 green 3 000 – 255 blue 6 channels mode channel value function 1 000 – 255 master dimmer 2 000 – 255 red 3 000 – 255 green 4 000 – 255 blue 5 000 – 009 not used 010 – 255 sound mode 6 000 – 255 non usato 000 – 255 st...

  • Page 20

    20 6. - maintenance to ensure optimal performance, the unit must be frequently cleaned. Unplug the device from the mains and let it cool for at least 35 minutes to avoid the risk of burns. Use a vacuum cleaner or an air compressor and a soft brush or a lens cloth to remove the dust deposited. The le...

  • Page 21

    21.

  • Page 22

    22.

  • Page 23

    23.

  • Page 24

    Proel s.P.A. Via alla ruenia 37/43 64027 sant'omero (te) italy tel. +39 0861 81241 fax. +39 0861 887862 mail: info@proel.Com web: www.Proel.Com.