Summary of Aroma art
Page 1
Please read and save this manual ultrasonic nebulizer instruction manual.
Page 2
Ultrasonic nebulizer atomiseur ultrasonique live healthier by improving the quality of air you breathe..
Page 3: Table of Content
3 table of content benefits of nebulizing diagram of parts specifications operating instructions cleaning & maintenance cautions & safety instructions troubleshooting savings coupon 1 2 3 4 6 7 9 10
Page 4: Benefits of Nebulizing
1 benefits of nebulizing diffusing essential oils releases into your living space the same tranquil qualities of negatively charged electric ions that you experience being near the ocean, helping to relieve feelings of stress, anxiety and low energy. Negative ions are essential to our body for susta...
Page 5: Diagram of Parts
2 diagram of parts 1. Cover 2. Water tank 3. Unit base 4. Maximum water level 5. Led lights 6. Mist setting indicators 7. Mist nozzle 8. Light button 9. Mist setting button 10. Power adaptor 11. Dc power jack 12. Air outlet 13. Transducer 14. Measuring cup 8 10 14 9 5 4 12 11 7 6 1 2 3 13.
Page 6: Specifications
3 specifications product name aromaart input voltage output voltage rating power water tank capacity misting duration dimensions net weight materials 100 - 240 volts ac 50/60 hz 18 volts dc 500 ma 9 watts 600 ml 190 mm (d) x 200 mm (h) 550 g with adaptor abs; pp high: approx. 12 hrs. Low: approx. 18...
Page 7: Operating Instructions
4 operating instructions 1. Connect power adaptor to dc power jack on back of unit. 2. Remove the cover from the unit base to expose water reservoir. 3. Fill water tank with tap water to no higher than max. Water level line (600 ml, approx. 15 mm below tank rim). Do not exceed max. Water line (600 m...
Page 8: Light Button:
5 4. Add 10 drops of your favourite saje diffuser blend to the water. 5. Replace the cover and ensure that it fits properly onto base. 6. Press the control buttons and select desired settings light button: controls 3 led lights on base of unit. Mist setting button: controls mist output levels betwee...
Page 9: Cleaning & Maintenance
6 cleaning & maintenance 1. Turn off unit and unplug power adaptor. 2. Remove cover. 3. Empty water from left side of unit. Do not empty water from the air outlet side. 4. Use a soft cloth or clean swab to clean the unit and transducer. Transducer should be kept clean of mineral deposits and other d...
Page 10
7 cautions & safety instructions only use the power adaptor supplied with the device. Use only as described in this manual. To reduce the risk of electric shock, do not attempt to service the device in any way other than as described in the “cleaning & maintenance” section of this manual. Never oper...
Page 11
8 do not to touch the highly sensitive transducer with bare fingers, or scrape it with metal tools (otherwise mist output may be reduced). Remove any liquid in the water tank after each use. Do not attempt to repair the device yourself. Always keep unit out of reach of small children and pets. • • •...
Page 12: Troubleshooting
9 troubleshooting no power the adaptor is not properly plugged. The mist on/off button is not depressed. No water or too little water in the water tank. The transducer is dirty. Water is higher than the max. Water level line. Excluding the above two reasons, if the fan is work- ing, check if the ven...
Page 13
10