Salter BPW-9100 Instructions And Guarantee

Manual is about: Fully Automatic Electronic Blood Pressure Monitor

Summary of BPW-9100

  • Page 1

    Bpw-9100 blood pressure monitor instructions and guarantee e blood pressure monitor instructions and guarantee e.

  • Page 2

    Gb 2 weee explanation this marking indicates that this product should not be disposed with other household wastes throughout the eu. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resou...

  • Page 3

    Gb 3 intended use fully automatic electronic blood pressure monitor is for use by medical professionals or at home and is a non-invasive blood pressure measurement system intended to measure the diastolic and systolic blood pressures and pulse rate of an adult individual by using a non-invasive tech...

  • Page 4

    Gb 4 product description based on oscillometric methodology and silicon integrated pressure sensor, blood pressure and pulse rate can be measured automatically and non-invasively. The lcd display will show blood pressure and pulse rate.The most recent 60 measurements can be stored in the memory with...

  • Page 5

    Gb 5 notice 1. Read all of the information in the operation guide and any other literature in the box before operating the unit. 2. Stay still, calm and rest for 5 minutes before blood pressure measurement. 3. The cuff should be placed at the same level as your heart. 4. During measurement, neither ...

  • Page 6

    Gb 6 17. This device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 18. This blood ...

  • Page 7

    Gb 7 3. Connecting the cuff to the monitor the cuff is attached to the monitor when it is packaged. Should the cuff become unattached, align the two plugs and four brackets of the cuff with the plug sockets and bracket sockets of the monitor and press the cuff to the monitor until the plugs and brac...

  • Page 8

    Gb 8 7. Displaying stored results a. After measurement, you can review the results in the memory bank by pressing the “mem” button. Alternatively, you can press “mem” button in clock mode to display the stored results. If it no result stored, lcd will show dashes as picture 7, while press the button...

  • Page 9

    Gb 9 9. Assessing high blood pressure for adults the following guidelines for assessing high blood pressure (without regard to age or gender) have been established by the world health organization (who). Please note that other factors (e.G. Diabetes, obesity, smoking, etc.) need to be taken into con...

  • Page 10

    Gb 10 11. Troubleshooting (2) problem possible cause solution lcd shows low battery symbol lcd shows low battery symbol change the batteries lcd shows “er 0” pressure system is unstable before measurement don’t move and try again. Lcd shows “er 1” fail to detect systolic pressure lcd shows “er 1” fa...

  • Page 11

    Gb 11 contact information for more information about our products, please visit www.Salterhousewares.Com for uk sales and service contact homedics group ltd, homedics house, somerhill business park, five oak green road, tonbridge, kent tn11 0gp, uk. Helpline tel no: (01732) 360783. For ireland, plea...

  • Page 12

    Gb 12 electromagnetic compatibility information table 1 for all me equipment and me systems guidance and manufacture’s declaration – electromagnetic emission the [bpw-9100] is intended for use in the electromagnetic environment specified below. The customer or the user of the [bpw-9100] should assur...

  • Page 13

    Gb 13 table 3 for me equipment and me systems that are not life-supporting guidance and manufacturer’s declaration - electromagnetic immunity the [bpw-9100] is intended for use in the electromagnetic environment specified below. The customer or the user of the [bpw-9100] should assure that it is use...

  • Page 14

    14 gb table 4 for me equipment and me systems that are not life-supporting recommended separation distances between portable and mobile rf communications equipment and the [bpw-9100] the [bpw-9100] is intended for use in an electromagnetic environment in which radiated rf disturbances are controlled...

  • Page 16

    Homedics group ltd homedics house, somerhill business park, five oak green road, tonbridge, kent tn11 0gp, uk. Www.Salterhousewares.Co.Uk ib-bpw-9100-gb-0314-01 e register your product today at: www.Homedicsgroup.Com/register 0120