SEEBURG acoustic line
Do not operate the A6 dp if you have any concerns regarding safety or if the
loudspeaker box should malfunction. The equipment has no user-serviceable
parts inside. In the event of repair, please contact your dealer or qualified
Connect the A6 dp to a 230V/50Hz grounded safety socket. The equipment
corresponds to protection class 1. In case of overload, a protective element is
activated which reliably protects the amplifier module and the DSP. However, it
must then be replaced by an authorised service centre.
Always remove the mains plug when opening the loudspeaker box (for
example when turning the horn).
Do not expose the A6 dp to rain and, if possible, do not operate the speaker
outside of a temperature range of -5°C to 40°C. Bear in mind that strong
thermal fluctuations result in the formation of condensate, therefore do not
operate the speaker until the speaker box has assumed the ambient
temperature. Do not switch the equipment off if it is being used in adverse
In order to avoid overheating of the speaker chassis and the built-in amplifier
module, never operate the A6 dp in the close vicinity of intense heat sources
and avoid direct sunlight.
After several hours of operation the housing (especially all-metal parts such as
the speaker stand flange and connection panel) can reach temperatures of
more than 40°C.