Smart+ products infrared heater user’s manual model# spp-1500-4pr 120vac 15 amp dedicated circuit for indoor use only the smart+ products infrared heater works with your in ‐ home furnace to provide supplement heat. Carefully and thoroughly read this manual before using the smart+ products infrared ...
Thank you for choosing a smart+ products infrared zone heating system. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the...
Specifications safety features tip-over safety feature this heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch will automatically shut the heater off. Once the heater is restored an upright position, the heater will reset. To continue operation, tur...
Warning: this heater has a voltage rating of 120 volts. The cord has a plug as shown in a. An adapter as shown in c is available for connecting three-blade grounding-type plugs to two-slot receptacles. The grounding lug extending from the adapter must be connected to a permanent ground such as a pro...
Control panel 1 2 3 4 1211109 8 7 6 5 1 、 signal-receiving window: for receiving remote control signal. 2 、 digital display ： indicate set room temperature or time value according to the timer. 3 、 power indication light ： indicate when the unit connects to power supply. 4 、 on/off switch button: fo...
Remote control mode button: used for mode selection on/off button: used for power- on or power-off temp up button: to make set temperature raise temp down button: to make set temperature ecline timer button: used for setting timer and adjust time value of timing preparation place the heater on a fir...
Operating instructions 1 、 start and select working mode 2 、 setting room temperature voltage rating 120 v (60hz) power consumption 1000/1500w unit size 13.1 in. (w) x 16.5 in. (d) x 16.7 in. (h) unit weight 22.7 lbs or turn the heater on by pressing the on/off button on the control panel or by pres...
3 、 setting timer-power-off caution! Only under power-on mode can you set timer- power-off function. 4 、 setting timer-power- on caution! Only under power-off mode can you set timer-power-on function. 5 、 setting electro lock function of electro lock can avoid misoperation from children. Locking can...
Maintenance 1 turn off the power switch in the rear of the unit. 2 unplug the unit and let it cool completely. 3 to keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. Caution: do no...
Storage store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the original packaging to repack the unit. Troubleshooting if the heater will not operate, please check the following before seeking repair of service: 1. Check if the power cord is plugged into ...
