Takex DA-303S Instruction Manual

Summary of DA-303S

  • Page 1

    Cover connection cable (1.5m) body base connector dip switch sensitivity mounting screws (2 pcs) mounting template instruction manual operation led pattern width detection window adjustment ① 1 2 parts description precautions caution: observe following instructions to avoid any mulfunction, electric...

  • Page 2

    After power-on or restart, - when there is any moving object in detection pattern, moving object detection is activated. - when there is no moving object in detection pattern, stationary object detection is activated. ② caution: before power-on, finish wiring the unit and door controller. Be sure to...

  • Page 3

    6 adjusting detection pattern caution: adjust patter depth suitable for required operation. After mounting the unit, and setting parameters and adjustment, verify if detection pattern and sensitivity are suitable for required operation. Caution: adjust pattern depth not to cover door area. 7 adjusti...

  • Page 4

    Cause solution bad wiring or connection via connector ensure correct wiring or connection. Incorrect power supply/voltage ensure appropriate power supply/voltage. Insufficient sensitivity increase sensitivity. Inappropriate detection pattern reajust detection pattern. Pattern depth covers door area ...