Takumi K-10 Owner's Manual

Summary of K-10

  • Page 1

    Takumi k-10 owner's guide takumi k-7 preamplifier 1 2 4 min max source volume 3.

  • Page 2

    Thank you we extend our hand in deep gratitude, thanking you for selecting the takumi k-10 pre-amplifier. This pre-amplifier is easy to install and use but there are some precautions that need to be observed in order to attain maximum performance, safety and reliability. Please therefore read carefu...

  • Page 3

    Placement requirements owing to the substantial 27kg weight of the k-10, this pre-amplifier should be placed on a firm, stable and solid surface. The use of a dedicated audio stand or plinth may provide some degree of increased performance. Areas of high humidity, direct sunlight, exposure to flamma...

  • Page 4

    Connections inputs - source 1 any balanced source component may be connected to source 1. Best results will be generally obtained when the source component offers a moderate to low output impedance as most (but not all) balanced source components do. If your source component offers both balanced and...

  • Page 5

    Ac inlet unless otherwise specified, the k-10 is designed for 240v use. Ac voltage is marked on the back of the k-10, just above the ac receptacle. This pre-amplifier will function to specification on any ac voltage between 210 and 245v. The power requirement is 30w when the unit is on and 0w when t...

  • Page 6

    Front panel description orange neon indicator this indicator becomes illuminated when the power is on. Volume control adjust as required. Please note that compared to other pre-amplifiers, you may need to turn the control to a higher setting that you are accustomed to. The specific setting needed is...

  • Page 7

    Technical specifications weight dimensions input impedance output impedance input equivalent noise typical mid-band distortion voltage gain frequency response power consumption 27kg unpacked. 169mm high with feet installed, 380mm wide and 380mm deep excluding knob and socket protrusions. 50k ohm (si...

  • Page 8

    The meaning of "takumi" the meaning of the japanese character “takumi” can be translated as “maestro”. Our brand endeavours to build a product in the spirit of maestro. 1-9-4 azusawa itabashi-ku tokyo 174-0051 japan robert-koda llc.