Tangent AMP-100 Instruction Manual

Manual is about: Integrated amplifier

Summary of AMP-100

  • Page 1

    Amp-100 integrated amplifier instruction manual design and engineering.

  • Page 2

    This operation manual supplies all the information that you need to have about your tangent amp-100. Please read this operation manual carefully before you start using the unit! 02.

  • Page 3

    Contents contents safety precautions important safety instructions important information connection remote control front panel connections contents 03 safety precautions 04 important safety instructions 05 important information 07 connection to the mains 08 installation of batteries 09 using the rem...

  • Page 4

    To minimise the risk of fire or electrical shock, do not expose the unit to rain or moisture. Do not open the cabinet as it contains dangerous voltage. Only qualified technicians are allowed to carry out repair and service. If the plug of the power cord needs to be replaced, it is important that the...

  • Page 5

    Warning: it is important that you read and observe both the instructions in this manual and the instructions on the unit. Keep this manual for future reference. This unit was designed and manufactured with a view to providing maximum safety for the user. Incorrect use of the unit may cause electrica...

  • Page 6

    Service do not attempt to carry out any service work yourself. By opening or removing the cabinet, you will be exposed to dangerous voltage or other hazards. Any service work should be carried out by qualified technicians. Spare parts if spare parts are required, make sure that the service technicia...

  • Page 7

    Important information handling instructions - the top and back panel of the unit may become warm after prolonged use. This is not due to a defect. - turn off the power when the unit is not used. Protect the power cord - follow the instructions below to prevent abnormal operation, electrical shock, f...

  • Page 8

    Tuner aux 2 aux 1 cd dvd phono item no.: power rating 230-240 v ac~50hz model: amp-100 max power consumption: 150w serial no.: line out ~ac input 230-240v 50hz connection connection to the mains do not turn on the power before all connections have been made correctly. Check that all connections have...

  • Page 9

    Remote control installation of batteries 1 remove the cover as illustrated. 2 position two batteries of the type aaa/r03/um4 in the battery compartment. Make sure that the orientation of the batteries is correct (see drawing at bottom). 3 replace the cover. - do not mix new and old batteries and do ...

  • Page 10

    Some of the functions of the unit can only be performed by means of the remote control. Some functions are connected with the selected signal input source. Some buttons on the remote control may therefore not be available if the corresponding signal input source has not been selected. Remote control...

  • Page 11

    Front panel and connections front panel 1. Mains switch: 2. Led indicator: 3. Treble: 5. Bass: 6. Phono: 7. Tuner: 8. Dvd: 9. Cd: 10. Aux 1: 11. Aux 2: 12. Function: used to interrupt the mains voltage. Lights green when the amplifier is turned on. Lights red when the amplifier is in standby mode or...

  • Page 12

    Front panel and connections connections 1. Line output: 7. Phono 8. Speaker left & righ 9. Ac input: for connection of an external amplifier. : for connection of a record player (note: additional ground terminal available above inputs). T: for connection of loudspeakers. Note: - the speaker impedanc...

  • Page 13

    Connection audio connection layout slave amplifier amp-100 integrated amplifier speakers speakers subwoofer (optional) tuner aux 2 aux 1 cd dvd phono item no.: power rating 230-240 v ac~50hz model: amp-100 max power consumption: 150w serial no.: line out ~ac input 230-240v 50hz power 13 turntable da...

  • Page 14

    Power operation and functions protect the environment and turn off the unit after use. Selecting the input source turn on the amp-100 by pushing one of the input buttons. Now you can call the input source that is active at the moment. Select tuner to listen to the radio, cd to listen to a cd, dvd, p...

  • Page 15

    Operation and functions using the function menu the amp-100 features a "function menu" that allows adjustment of the following when accessed via the remote: bass, treble, balance and loudness (see menu structure below). A description of the individual functions will follow on the next few pages. Not...

  • Page 16

    Operation and functions bass control 1. Press the function button on the remote control to enter the function menu. Keep pressing the function button on the remote until the display on the amplifier shows bass 2. Press vol+ and vol- to adjust the bass level. 3. If you wish to adjust the bass level t...

  • Page 17

    Operation and functions 1. Press the function button on the front panel or the remote until information on balance control is displayed. 2. Turn the volume control to adjust balance. Note if the balance control is not operated within five seconds, the display will return to the volume information di...

  • Page 18

    Troubleshooting troubleshooting problem cause/remedy no power when the amplifier i no sound. There is sound in one channel only. High buzzing. S turned on. Weak bass and poor stereo perspective distortion of sound the lcd display does not display any information “error 1” is displayed on the lcd dis...

  • Page 19

    Technical data technical data phono input line level inputs input impedance 47 kohm input sensitivity 3.8mv (tuner, cd, dvd, aux1, aux2) input impedance 47 kohm input sensitivity 200mv output impedance line out 100kohm headphones 300ohm maximum output level line out 740mv headphones 1.25v treble +/-...

  • Page 20

    For further information please visit our website: www.Tangent-audio.Com item no. 40327 service hotline +45 9641 1599.