TapFlo CTV 25-10 Instruction Manual

Manual is about: CTV series

Summary of CTV 25-10

  • Page 1

    Instruction manual vertical centrifugal pumps instructions for installation, start up, operation, maintenance and repair spare parts read this instruction manual carefully, before you install and operate the pump edition 1/2008 hi\\arbetsfiler\instruktioner\tapflo\pumpar\ctv vertical centrifugal p u...

  • Page 2

    Instruction manual ctv vertical pumps 2 contents chapter content page contents 2 ce certificate 3 0. General 4 0.1 introduction 4 0.2 the warning symbols 4 0.3 qualification and training of personnel 4 0.4 description of the pump 5 0.5 general limits 5 0.6 health & safety 6 1. Installation 7 1.1 rec...

  • Page 3

    Instruction manual ctv vertical pumps 3 declaration of conformity machinery directive 89/392/eec, annex 2a tapflo ab declares that: product name: vertical centrifugal pumps models: ctv… is in conformity with the essential health and safety requirements and technical con - struction file requirements...

  • Page 4

    Instruction manual ctv vertical pumps 4 0. General 0.1 introduction ctv is a vertical, seal less centrifugal pump made from pp, pvdf or stainless steel aisi 316l. With proper attention to maintenance, ctv pumps will give efficient and trouble free operation. This instruction manual will familiarise ...

  • Page 5

    Instruction manual ctv vertical pumps 5 0.4 description of the pump the ctv pumps are centrifugal, vertical, single-stage pumps with the pump casing directly submer - ged in the liquid. It is driven by a non-synchronus electric motor. The inlet is axial, facing downwards and has a bsp threaded conne...

  • Page 6

    Instruction manual ctv vertical pumps 6 0. General 0.6 health & safety electric safety do not carry out any maintenance operation on the pump while it is running or before it has been disconnected from the power supply. Avoid any danger caused by electric power (for details see current regulations i...

  • Page 7

    Instruction manual ctv vertical pumps 7 1.1 receiving inspection although precaution is taken by us when packing and shipping, we urge you to carefully check the shipment on receipt. Make sure that all parts and accessories listed on the packing list are accounted for. Immediately report any damage ...

  • Page 8

    Instruction manual ctv vertical pumps 8 1.5 installation example flooded installation installation with suction extension all installations 1) valve for flow control (diaphragm valve or similar) 2) non-return valve (check valve) on discharge side as near the pump as possible 3) connection point for ...

  • Page 9

    Instruction manual ctv vertical pumps 9 1.6 instruments in order to ensure a reasonable control of the performance and the conditions of the pump instal- led, we recommend using the following instruments: - a pressure-vacuum gauge on the delivery piping. The output can be read on the pressure, trans...

  • Page 10

    Instruction manual ctv vertical pumps 10 2. Operation 2.1 start-up - the motor shall be connected by qualified personnel only. - check manually that the motor is free to turn, moving the motor cooling fan. - make sure that the piping is not clogged and is free from residues or foreign objects. - bum...

  • Page 11

    Instruction manual ctv vertical pumps 11 3. Maintenance maintenance work on electrical installations must be performed by qualified personnel and only when the power supply has been shutoff. Follow the local and national safety regulations. 3.1 maintenance schedule the ctv range pumps generally do n...

  • Page 12

    Instruction manual ctv vertical pumps 12 3. Maintenance 3.3 assembly and disassembly the assembly and disassembly should only be performed by qualified personnel. While working on the pump protective clothing such as eye glasses and gloves should be worn. Each operation carried out on the machine mu...

  • Page 13

    Instruction manual ctv vertical pumps 13 3. Maintenance 3.3.2 dismantling pp & pvdf pumps - after removal of eventual suction extension or strainer, place the pump horizontally on a bench. - unscrew counterclockwise the lock ring (132) by inserting suitable tool in the holes. - remove the pump cover...

  • Page 14

    Instruction manual ctv vertical pumps 14 4. Spare parts 4.1 spare parts ctv pumps in pp & pvdf 161 122 151 15 20 121 11 12 18 9... 162 194 193 131 132 electric motor pos description qty/ pump material 11 pump casing unit 1 pp or pvdf 12 discharge pipe 1 pp or pvdf 121 motor mounting screw 4 stainles...

  • Page 15

    Instruction manual ctv vertical pumps 15 161 122 121 143 142 141 11 15 13 12 17* 18 9... 162 192 191 electric motor 4. Spare parts pos description qty/ pump material 11 pump casing unit 1 aisi 316l 12 discharge pipe 1 aisi 316l 121 motor mounting screw 4 stainless steel 122 motor mounting washer 4 s...

  • Page 16

    Instruction manual ctv vertical pumps 16 4. Spare parts 4.3 stocking recommendation depending on the nature of the liquid and temperature etc, some parts of the pump are subject to wear and have to replaced. We recommend having the following parts in stock: ctv vertical centrifugal pump material pum...

  • Page 17

    Instruction manual ctv vertical pumps 17 5. Data 5.1 performance curves the performance curves are based on water at 20°c. Speed 2900 rpm. Contact us for detailed curves. 5.1.1 performance curves pp & pvdf pumps changes reserved without notice 5.1.2 performance curves stainless steel pumps.

  • Page 18

    Instruction manual ctv vertical pumps 18 5. Data changes reserved without notice 5.2 technical data 5.2.1 data pp & pvdf pumps dimensions in mm, where other is not indicated general characteristics 25-9 25-10 25-11 25-11.5 32-8.5 32-10 32-12.5 max capacity (m 3 /h) 10.2 13.2 15.6 18.0 19.8 24.0 27.0...

  • Page 19

    Instruction manual ctv vertical pumps 19 5. Data changes reserved without notice 5.2.2 data stainless steel pumps dimensions in mm, where other is not indicated general characteristics 20-9 25-9.8 25-9.8 40-12.5 40-12.5 40-13.5 max capacity (m 3 /h) 12.0 17.0 17.0 19 34 20 max head (m) 10 11 11 22 2...

  • Page 20

    Instruction manual ctv vertical pumps 20 6. Warranty & repair 6.1 returning parts when returning parts to tapflo ab please follow this procedure: - consult tapflo ab for shipping instructions. - cleanse or neutralize and rinse the part/pump. Make sure the part/pump is completely empty from liquid. -...

  • Page 21

    Instruction manual ctv vertical pumps 21 6 repair or replacement under the terms of this warranty shall not give a right to an extension to, or a new commencement of, the period of warranty. Repair or replacement under the terms of this warranty may be fulfilled with functionally equivalent recondit...

  • Page 22

    Instruction manual ctv vertical pumps 22 6. Warranty & repair company: telephone: fax: address: country: contact name: e-mail: delivery date: pump was installed (date): pump type: serial no (see name plate): description of the fault: the installation liquid: temperature (°c): viscosity (cps): spec. ...

  • Page 23

    Instruction manual ctv vertical pumps 23 notes.

  • Page 24

    Distributor: tapflo ab · filaregatan 4 · s-442 34 kungälv · sweden tel (46) 303 63390 · fax (46) 303 19916 · e-mail: sales@tapflo.Com · www.Tapflo.Com.