TATAREK RT-08P User manual

Summary of RT-08P

  • Page 1

    Zakład elektroniczny tatarek jerzy tatarek user manual 1 kominek lux (rt-08p) regulator of heating system with a fireplace controlled by air throttle 16 rt08p/2008/v.1.8 ang 1.Basic technical parameters: power 230v/50hz power consumption without load 5w max connection power 750w o operation conditio...

  • Page 2: Firplace

    15 admission date realization date signature remarks 2 2. Principle of operation the first function of the regulator is to keep temperature in the water jacket at set value. The task is realized by measuring temperature (t3) and controlling the throttle (pp) properly. Fireplace operation temperature...

  • Page 3: Firplace

    14 3 ce conformity declaration ref. No. 58.Rt.01.2007/1/b we, zakŁad elektroniczny tatarek jerzy tatarek 75 swieradowska st. , 50-559 wroclaw declare under our sole responsibility that the product: regulator of heating system with solar collector model: rt-08, rt-08k, rt-08p is in conformity with th...

  • Page 4

    4 13 waw warm applicable water accumulator (boiler) firplace water jacket fireplace ch central heating system t1 upper temperature sensor of waw t2 lower temperature sensor of waw t3 temperature sensor of fireplace water jacket p1 pump supplying waw from fireplace p2 pump of the primary side of heat...

  • Page 5

    5 2.4 waw priority and summer mode 2.5 output „control” 3 service of the regulator załączony przekaźnik sterowanie wskazanie górnego czujnika cwu wskazanie dolnego czujnika cwu wskazanie czujnika kominka co * kom cwu 80 o 73 o 68 o 12  keeping the accumulator waw at maximal readiness (parameter ”c...

  • Page 6

    6 11 fig.2 control panel view 1. Text display 2. Increase button 3. Choice button of parameter 4. Decrease button 5. Confirm button 6. Power button 7. Status lamp of the regulator: emergency(red), standby (orange), operation (green) 8. Lamp of pumps operation 9. Lamp of throttle operation (blinking ...

  • Page 7

    7 3.2 screens alarm !! T1 alarm !! T.Firep firplace 74 o 30% 73 o set temperature fireplace sensor readout t3 level of throttle opening waw 80 o 68 o upper temperature sensor t1 (if available) lower temperature sensor t2 it’s a stable state that is in order to change it one needs to press the choose...

  • Page 8

    8 control relay is turned on. Upper sensor of waw lower sensor of waw fireplace sensor 80 o 73 o 68 o if the summer mode is active (only waw), summer replaces ch. It’s a stable screen that is in order to change it one needs to press the choose button screen of fireplace operation mode firp.Mod auto ...