µ-Dimension 12/400N Owner's Manual

Summary of 12/400N

  • Page 1

    Iso 9001:2008 certified company form 121114 model: 12/400n owners manual september 2007 dc to ac power inverters 121114c manufacturer of dimensions tm inverters 4467 white bear parkway st. Paul, mn 55110 phone: 651-653-7000 fax: 651-653-7600 e-mail: inverterinfo@sensata.Com web: www.Dimensions.Sensa...

  • Page 2

    Page 2 owners manual for sensata technologies dimensions inverters model adi-12/400n table of contents page 1. General . . . . . . . . . . . . . 2 2. Description . . . . . . . . . . . 2 3. Installation . . . . . . . . . . . 2 4. Start up/operation . . . . . . 4 5. Troubleshooting . . . . . . . . 4 6...

  • Page 3

    3.05.3 u.L. Codes require the use of an auxiliary fuse to be installed within 18 inches from the battery. 3.05.4 note: using smaller input cable or longer length will greatly degrade the inverter peak performance. Note for vehicle installation: do not use the vehicle chassis as the negative return i...

  • Page 4

    Using the furnished connector. Connect the wire to the load side of the switch. Connect the line side of the remote switch to fused, positive battery. The actual load draw through the remote switch is less than .1 amp. The fuse should not be larger than the amp capacity of the switch or the hookup w...

  • Page 5

    Page 5 dimensions inverter note: the inverter must be connected to the 12 volt battery with the correct polarity. The red wire is "positive +", and the white wire is "negative -". Connecting the inverter improperly will cause damage that is not covered under warranty. Battery 12 volts - + figure #1 ...

  • Page 6

    Page 6 limited warranty terms & conditions shipping terms: f.O.B. St. Paul minnesota. Freight prepaid and billed, subject to prior credit approval. Minimum order: $50.00 net price loss or damage: loss or damage in transit are the responsibility of the carrier. Any claim should be filed with the deli...