U-Line 75F Supplementary Manual

ORIGINS 

¼” CUSTOM PANEL SIZES 

BI

·95 

13 15/32” H x 12 15/16” H 

BI

·98 

15 15/16” x 13 15/16” W 

75 Series 

28 5/32” H x 22 15/16” W 

75 Stainless Series 

29 13/32” H x 22 15/16” W 

29 Series  

21 13/32” H x 19 13/16” W 

15 Series 

28 5/32” H x 13 15/16” W 

15 Stainless Series 

29 13/32” H x 13 15/16” W 

Zero clearance on black and white models with a flush/flat 

door panel. 

Door will accept a raised panel.  Allow proper clearance, on 

hinge side when installing a raised panel.  Amount of clearance 

will depend on raised panel thickness. 

The maximum panel thickness when inserted into the door reveal  

(channel) is ¼” thick. 

For raised panels, on black and white models,  the depth of the 

reveal is ¼” on both sides and bottom and ½” on  top. 

For raised panels, on stainless steel models, the depth of the  

reveal is ¼” on both sides, top and bottom. 

Allow 9/16” clearance on hinge side for all stainless steel models 

with flush/flat panel. Additional clearance maybe needed, on hinge 

side when installing a raised panel.  Amount of clearance will depend 

on raised panel thickness.  

Panel not to exceed 20 pounds.

Conversion information: 1 inch = 2.54 cm