Vais Technology SoundLinQ3 SL3sat Owner's manual

Other manuals for SoundLinQ3 SL3sat: Owner's manual
Manual is about: Bluetooth Interface Adapter for iOS, Android, and other devices with Bluetooth Streaming capabilities.

Summary of SoundLinQ3 SL3sat

  • Page 1

    Audio interface controller with built-in siriusxm satellite radio interface www.Vaistech.Com owner’s manual copyright (c) 2003-2013 vais technology published june 7, 2013 toyota • lexus • scion ( sxv200 siriusxm tuner required ).

  • Page 2

    Do not disassemble or alter doing so may result in an accident, fire or electric shock do not block your view do not mount product or any added audio and/or video equipment where it can block your view through the windshield or your view of dashboard indicators and displays. Do not block the airbag ...

  • Page 3

    Before you start this unit is equipped with: ! Built-in electronic ground noise isolator to eliminate unwanted car engine noise. ! Resettable fuses (provides protection for electronic circuits from over-current conditions) this unit is a interface adapter for toyota/lexus head unit to control xm n t...

  • Page 4

    Connections 4 connecting the units vehicle antenna siriusxm tuner sxv200 soundlinq3 20-pin y- harness soundlinq3 audio harness (36”) soundlinq3 12-pin y- harness soundlinq3 interface adapter model sl3sat mode programming switch power and audio wiring harness service port red led interface connector ...

  • Page 5

    Connections 5 head unit (radio receiver) factory audio harness soundlinq3 20-pin y- harness plug into head unit (connector “a”) a a to soundlinq3 connection diagram used for all 2001-2009 lexus vehicles connecting soundlinq3 to head unit using 20-pin y-harness head unit (radio receiver) connection d...

  • Page 6

    Installation we strongly recommend that you install the unit in an easily accessible location, so you can later upgrade the unit or re-program it in case of incorrect programming. Important @ gain access to the back of your vehicle’s head unit. @ find the same port as our y-harness (see “connecting ...

  • Page 7

    Installation 7 mounting unit using velcro fasteners ! Velcro fasteners are not included ! Vais technology strongly recomand to ground unit to the car chassis for best results note “hard” velcro fastener carpet or car chassis soundlinq3 “soft” velcro fastener 1 2 on 1 2 on md changer emulation mode p...

  • Page 8

    Sat emulation pages 9-12 ----------------------------------- cd changer or md changer emulation pages 13-17 8 emulation.

  • Page 9: Sat Emulation

    Audio input dedicated for siriusxm satellite radio can only be used for integration. Control of siriusxm satellite radio this unit supports the sirius tuner model # sxv200. Siriusxm radio is done through your head unit or the steering wheel controls (explained below). Xm please see attached chart to...

  • Page 10

    Head unit controls 10 select desired source by pressing the am button on the head unit or mode on the steering wheel control. (see diagram below) head unit: to switch between unit sources, press the am button on the head unit. The am button will cycle through the following modes: am radio, sat1, sat...

  • Page 11

    To display the song title and artist name that is currently playing, press the text button. If the information is available from the current satellite channel, it will be displayed. Song title and artist name can display a maximum of 16 alphanumeric characters each. Track+ track- and use the seek-tr...

  • Page 12

    Satellite radio input settings you can adjust the input sound level of your satellite receiver. The sound level adjustment allows you to balance the volume control with other sources connected to your head unit (such as cd player, fm radio, etc), and eliminate possible distortions caused by high inp...

  • Page 13: Cd/md Changer Emulation

    Audio input dedicated for siriusxm satellite radio can only be used for integration. Control of siriusxm satellite radio this unit supports the sirius tuner model # sxv200. Satellite radio is done through your head unit or the steering wheel controls (explained below). Xm this unit can be programmed...

  • Page 14

    Satellite radio controls you must set the correct display mode, in order to display channel number and text information correctly. ( see “satellite radio input settings” for details). Track+ track- and select next/previous channel (if the selected channel is not available, the unit will jump to the ...

  • Page 15

    Presets note: beep indicates successfully accomplished operation. If you do not hear a beep, please repeat the above steps. @ select the desired channel @ press the [rpt] or [repeat] button 4 times (must be done within 1-2 seconds). You will hear a beep. @ soundlinq3 will store the current channel i...

  • Page 16

    Display settings soundlinq3 supports 8 types of display modes. Display mode can only be set up for the satellite radio source. It is critical to setup, the correct display mode for the following reasons: ! For channel information to be displayed correctly. ! For text information to be displayed. Dis...

  • Page 17

    Display settings track number, minutes , and secondsare used to display the selected satellite channel number. Note: for cars with the radio integrated into the navigation system, “disc” number must be “invisible” or “12” in order to have all ten numbers availablefor “direct entry”. Artist name song...

  • Page 18: Warranty

    18 licensing agreement, disclaimers and limited warranty vais technology, llc license agreement for u.S.A. (hereinafter referred to as ‘product’) and its related software for most toyota/lexus vehicles 2001-2013; (hereinafter collectiv ely referred to as ‘products’). This is a legal agreement betwee...

  • Page 19

    A copy of the ‘operational warnings and safety instructions’ is to be kept with the vehicle at all times. 3.Disclaimer and limitation of warranties . (a) except as otherwise contained herein, the products and related documentation are provided to you, “as is”. In no event shall vais be liable for an...

  • Page 20

    5. Limited warranty. Vais warrants that the products will be free from defects in materials and workmanship for a period of one (1) year from the date of purchase. Vais’s sole obligation under this warranty is to repair or replace at vais's option, any products that vais shall have determined to be ...

  • Page 21: The Vais Products.

    6. Other provisions: a. Indemnification of vais, its agents and employees . By purchasing, installing and using the products, you, the end- user, agree to indemnify, defend and hold harmless, vais, and it s affiliates, directors, officers, agents and employees from an y liabilities, damage, loss, cl...