ValueHD VHD-V800 User Manual - page 46

Summary of VHD-V800

  • Page 1

    Vhd-v800 user manual v1.2 valuehd corporation copyright: all contents of this manual, the copyright belongs to valuehd corporation, without the permission of the company, shall not be arbitrary imitation, copy, family copy or translation. This manual does not have any form of warranty, position, or ...

  • Page 2: Preface

    Valuehd corporation 1 preface : thank you for using the company's integrated high-definition intelligent teaching tracking camera. This manual details the general principles and methods of the functions of the camera, the installation and operation of the camera. Before installing and using the user...

  • Page 3: List

    Valuehd corporation 2 list note .................................................................................................................. 3 product feature .......................................... Fejl! Bogmærke er ikke defineret. Product spec ................................................

  • Page 4: Precautions

    Valuehd corporation 3 precautions  electrical safety the installation and use of this product must strictly comply with local electrical safety standards.  carefully transport transport, storage and installation process to prevent heavy pressure, severe vibration, soak damage to the product.  pow...

  • Page 5: Product Feature

    Valuehd corporation 4 product feature  integrated design integrated design, can also output 5 high-definition 1080p (close-up machine 3, panoramic machine 2) video. Students track with  lens can be replaced panorama lens can be replaced, compatible with c / cs interface lens, easy to cope with dif...

  • Page 6

    Valuehd corporation 5  ultra frame rate 1080p output frame rate up to 60fps  aac audio coding features aac audio encoding, better sound quality, less bandwidth.  local storage close-up machine to support the local storage function, no nvr can be realized u disk local direct recording tracking vid...

  • Page 7: Product Spec

    Valuehd corporation 6 product spec product model vhd-v800 product name integration of high - definition intelligent teaching tracking camera auto tracking camera video system hd: 1080p/60, 1080p/50, 1080i/60, 1080i/50, 1080p/30, 1080p/25, 720p/60, 720p/50, 720p/30, 720p/25 senser 1/2.7 inch, cmos, e...

  • Page 8

    Valuehd corporation 7 preset accuray 0.1° panorama camera video system 1080p/60, 1080p/50, 1080i/60, 1080i/50, 1080p/30, 1080p/25, 720p/60, 720p/50 senser 1/2.7 inch, cmos, effective pixels:2.07 million scanning scanning lens 12x, f3.5mm ~ 42.3mm, f1.8 ~ f2.8 automatic iris dc low light 0.05 lux @ (...

  • Page 9

    Valuehd corporation 8 audio bit rate 96kbps, 128kbps, 256kbps support protocols tcp/ip, http, rtsp, rtmp, onvif, dhcp, 组播等 input/output interface hd output 1xhdmi: version 1.3 2x3g-sdi: bnc type, 800mvp-p, 75Ω, along to smpte 424m standard network interface 2xrj45: 10m/100m ethernet interface audio ...

  • Page 10

    Valuehd corporation 9 standard accessories when opening the package, check and confirm all attachments that should be provided v800 integrated hd intelligent teaching tracking camera x1 power adapter, camera power supply x1 remote control, control camera x1 ac power extension cord, camera power supp...

  • Page 11: Remote Control

    Valuehd corporation 10 remote control 1. Standby button press the camera to enter standby mode and press the camera again to turn it on again.。 2、number button set preset or call preset 3、* button use with other buttons 4, set the preset position set preset: save a preset bit set preset + numeric ke...

  • Page 12: Host

    Valuehd corporation 11 in manual focus mode, you can focus on close objects by pressing [far] to focus on distant objects or [proximal]. 10, the camera selection key select the camera you want to control 11、# button use with other button 12. Infrared remote control address selection key 【 *】+【#】+【f1...

  • Page 13

    Valuehd corporation 12 introduction to host interface 1、close-up machine 2、panorama machine 3、install the positioning hole 4、install screw holes 5、the video system selects the rotary switch 6、rs232 out interface 7、rs232 out interface 8、rs232 in interface 9、lan network interface 10、line-in interface ...

  • Page 14

    Valuehd corporation 13 interface no. Interface name function 5 system select camera video output system selection 6 rs232 out use rs232 cable for communication between the camera and the recording and broadcasting host, the camera can output the director command, but also can receive the control com...

  • Page 15

    Valuehd corporation 14 17 net network interface, providing a network connection for the camera 18 dc 12v connect the power adapter to provide a 12v power supply for the camera.

  • Page 16

    Valuehd corporation 15 the setting of video system the sixteen rotary switches are used to set the format of the output video for the video port (video format).Video system switch position video format switch position video format 0 1080p60 8 720p30 1 1080p50 9 720p25 2 1080i60 a - 3 1080i50 b - 4 7...

  • Page 17

    Valuehd corporation 16 quick installation wall installation step 1: four holes on the wall that correspond to the size and position of the wall mounts, and the wall mounts are fixed to the walls step 2: place the alignment holes of the camera at the mounting brackets on the wall mounts step 3: rotat...

  • Page 18

    Valuehd corporation 17  live camera installation location description:  teacher installed close to the classroom axis, height of 2.2 meters;  student machine installed in the classroom before any position, height of 2.2 meters, installed in the recommended location.  camera system connection.

  • Page 19

    Valuehd corporation 18 network mode system connection diagram serial port system connection diagram description:  teacher mode, student machine, board computer, video recorder between the network mode and serial mode support, network mode support protocol: udp, tcp; serial mode baud rate: 9600  te...

  • Page 20

    Valuehd corporation 19  teacher machine / student machine / board computer can be sent to track the process of the state code or switch code to the recording and broadcasting host, recording and broadcasting host according to the instructions received video switching action  teacher machine / stud...

  • Page 21

    Valuehd corporation 20

  • Page 22: Tracking Function

    Valuehd corporation 21 tracking function 1 tracking configuration 1.1 tracking configuration tool: free installation, mouse double click, you can open the tracking configuration tool. 1.2 tracking configuration interface: 2 tracking parameter configuration 2.1 tracking parameter configuration select...

  • Page 23

    Valuehd corporation 22 3) board-side tracking interface selection go to the board-edge tracking configuration interface targeting interface selection 4) targeting interface selection go to the director-side configuration interface 2.2 language selection choice of chinese or english 2.3 teacher-side ...

  • Page 24

    Valuehd corporation 23 set the panorama bit: trim pan, that is, preset 0, set the preset 0 with the remote control. Call the panorama: call the trim scene. Set the station bit: close-up station, that is, preset 1, the remote control can be used to set the preset 1. Call the station bit: call the spe...

  • Page 25

    Valuehd corporation 24 panorama lens position calibration : check the "show verification cross", the close-up / panorama preview image display the check icon, and control it up and down by the ptz to ensure that the center of the image is coincident with the center of the panorama image, and then cl...

  • Page 26

    Valuehd corporation 25 version information:displays the version information of the writer and panorama. 6) set the shield area click [display] to display the current configuration tracking area and mask area in the preview image. Select the [tracking area], the left mouse button click on the preview...

  • Page 27

    Valuehd corporation 26 1) student side tracking parameter configuration refer to the teacher side configuration 2) student side close-up settings refer to the teacher side configuration 3) student end panorama ip address refer to the teacher side configuration 4) student side basic parameter configu...

  • Page 28

    Valuehd corporation 27 tracking settings:set the student side of the camera's work mode, select: boot tracking for other parameters please refer to the teacher side configuration 6) set the shield area student cameras do not need to set the tracking area, outside the shield area belongs to the track...

  • Page 29

    Valuehd corporation 28 neighborhood or on the boundary, as shown in the following figure: 7) turn on tracking click 【application (*)】, display as 【application】, the configuration parameters take effect! Click 【get】 to get the current camera configuration parameters; click [default] to restore the de...

  • Page 30

    Valuehd corporation 29 1) board-side close-up machine ip address board-side close-up machine ip address 2) board-side close-up machine settings refer to the teacher side configuration 3) panorama panorama ip address panorama ip address 4) the basic parameters of the board configuration tracking sens...

  • Page 31

    Valuehd corporation 30 board-side enable:check the "√", open the panel to enable; other parameters please refer to the teacher side configuration; 6) set the shield area refer to the teacher side configuration 7) turn on tracking click 【application (*)】, display as 【application】, the configuration p...

  • Page 32

    Valuehd corporation 31 click [default] to restore the default configuration parameters; click 【open tracking】, the camera enters the automatic tracking state, you can turn off the tracking configuration tool; click [stop tracking], the camera enters the stop tracking state, you can configure the tra...

  • Page 33

    Valuehd corporation 32 baud rate:communication protocol select the serial port, the serial port baud rate is 9600k bps, can not be modified. Protocol:camera and recording and broadcasting host communication between the serial port or network, need to select udp, tcp and a serial port, the default se...

  • Page 34: Network Function

    Valuehd corporation 33 first blackboard when there is action, send a blackboard to switch code, blackboard no action, to determine whether there is action in the student area, and finally judge the teacher action. For example, when the teacher is not in the platform area or is moving, send the teach...

  • Page 35

    Valuehd corporation 34 method 2: in the division i camera upgrade software configuration items to modify, and then click settings: 3. After changing the camera ip need to restart the camera,.

  • Page 36

    Valuehd corporation 35 there are two ways: method 1: manual power off method 2: click on the page system configuration item to restart (for remote) operation tips teacher machine factory default ip: 1、close-up machine 192.168.100.81 2、panorama machine 192.168.100.82 student machine factory default i...

  • Page 37: Menu Settings

    Valuehd corporation 36 menu settings this description mainly describes the special machine menu, panoramic machine menu only to explain the difference. 1. Main menu press the {menu} key in the normal image to display the menu contents, and use the scroll arrow cursor (hereinafter referred to as the ...

  • Page 38

    Valuehd corporation 37 gain limit: can be set: 0 ~ 15. (valid only in auto, aperture and brightness modes) anti-flicker: can be set items: off, 50hz, 60hz. (valid only for automatic and brightness priority) aperture: can be set: f1.8, f2.0, f2.4, f2.8, f3.4, f4.0, f4.8, f5.6, f6.8, f8.0, f9.6, f11.0...

  • Page 39

    Valuehd corporation 38 white balance sensitivity: can be set: high, medium, low 4. Image move the cursor to "image" in the main menu and press the [home] key to enter the image page, as shown in the following figure. Brightness: can be set: 0 ~ 14 contrast: can be set: 0 ~ 14 sharpness: can be set: ...

  • Page 40

    Valuehd corporation 39 left and right settings: can be set items: standard, reverse. Adjust the image when the setting is frozen: can be set: on, off. Display information: can be set: on, off. Digital zoom: settable items: off, 2x, 4x, 8x, 16x. 6. Noise suppression move the cursor to "noise suppress...

  • Page 41

    Valuehd corporation 40 protocol: can be set: auto, visca, pelco- d, pelco-p. Visca address: can be set: 1 ~ 7 (close-up machine without this menu) video format: can be set: 1080p25, 1080p30, 1080p50,1080p60,1080i50,1080i60,720p50,720p 60 (close-up machine without this menu) electronic head: can be s...

  • Page 42

    Valuehd corporation 41 9. Information(only the panorama has) in the main menu, move the cursor to "info" and press the [home] key to enter the information page, as shown in the following. 10. Reset in the main menu, move the cursor to "restore default" and press the [home] key to enter the restore d...

  • Page 43: Rs-232 Interface

    Valuehd corporation 42 rs-232 interface camera windows db-9 1. Dtr 1.Cd 2. Dsr 2.Rxd 3. Txd 3.Txd 4. Gnd 4.Dtr 5. Rxd 5.Gnd 6. Gnd 6.Dsr 7. Ir out 7.Rts 8. Nc 8.Cts 9. Ri camera mini din 1. Dtr 1.Dtr 2. Dsr 2.Dsr 3. Txd 3.Txd 4. Gnd 4.Gnd 5. Rxd 5.Rxd 6. Gnd 6.Gnd 7. Ir out 7.Nc 8. Nc 8.Nc no. Funct...

  • Page 44: Protocol List

    Valuehd corporation size protocol list note: the serial port of the camera follows the standard visca / pelco-d / pelco-p protocol. For secondary development, the camera can be controlled according to the standard protocol. To provide a detailed list of visca / pelco-d / pelco-p protocol, please con...

  • Page 45

    Valuehd corporation maintenance and troubleshooting the maintenance of the camera if the camcorder is not used for a long time, disconnect the power switch after use and disconnect the ac adapter from the ac outlet  when removing dust from the camera case, use a soft cloth or tissue when cleaning t...

  • Page 46

    Valuehd corporation sound failure  no sound 1、please check the host's audio connection 2、please check the ip camera audio parameter settings, whether the monitoring function is enabled tracking fault teacher side tracking location is not accurate, always biased in one direction 1, to repeat the pan...

  • Page 47: Valuehd Corporation

    Valuehd corporation  remote control cannot control 1、replace the new remote control battery; 2、is the camera connected correctly?。  serial port cannot control and communication 1、is the camera connected correctly?; 2、check that the control cable is well connected。  network fluent, but cannot cont...