Van De Leur 402 Manual

Manual is about: Class-D Dual mono Power amplifiers

Summary of 402

  • Page 1

    1 manual van de leur audio 402 © van de leur audio.

  • Page 2

    2 manual van de leur audio 402 © van de leur audio table of contents introduction ........................................................................................................................ 3 guarantee ........................................................................................

  • Page 3

    3 manual van de leur audio 402 © van de leur audio introduction carefully read this manual before using the product. Use this manual to correctly setup your audio equipment. All the functions and abilities of this product will be described within the next pages. Guarantee all van de leur audio produ...

  • Page 4

    4 manual van de leur audio 402 © van de leur audio installation check the amplifier for any visible damage. In the event of damage to the amplifier, contact your supplier. Make sure the amplifier is plugged into a 230 volts/50 hz mains supply. Ensure that there is enough ventilation room. Avoid cont...

  • Page 5

    5 manual van de leur audio 402 © van de leur audio the inputs consist of balanced (xlr) or unbalanced (rca) connections. Use the switch between the inputs to select the right input. When not selected correctly, there will be no audible sound. We recommend to only use the switch while having the ampl...

  • Page 6

    6 manual van de leur audio 402 © van de leur audio troubleshooting no led glow from front panel power switch. The led of the power switch located at the front panel doesn’t illuminate. - make sure the power cord is connected properly to an active power source. - the fuse is broken. Replace the fuse ...

  • Page 7

    7 manual van de leur audio 402 © van de leur audio specifications van de leur audio 402 technical specifications see graphs on the next page for more specifications..

  • Page 8

    8 manual van de leur audio 402 © van de leur audio frequency response @ 4 ohm, 8 ohm and open circuit.

  • Page 9

    9 manual van de leur audio 402 © van de leur audio appendix manual 402 adjustable damping factor (dealer only) the amplifier is equipped with an adjustable damping factor. This circuit is used to lower the damping factor and hereby adjusting the amplifier to the attached loudspeakers. The result is ...