Van Medevoort CA350 Instruction Manual

Summary of CA350

  • Page 1

    C a 3 5 0 instruction manual.

  • Page 2

    Vm ca350 stereo control amplifier vm instruction manual thank you for having bought this van medevoort product. We wish you many happy listening hours. The manufacturer accepts no responsibility for any misunderstanding and/or misinterpretation or the consequences arising there from due to this inst...

  • Page 3

    Vm ca350 stereo control amplifier before getting started in general when using your van medevoort product make sure that the following is observed: - the cooling air vents are not covered - the air can move freely around the product - the product is sited on a vibration-free surface - the product is...

  • Page 4

    Vm ca350 stereo control amplifier controls precautions connections maintenance and advice technical specifications Î 1 2 3 1. On / off power switch. Led indication control. Fully red when switched on, 50% red when in standby mode (selected with the van medevoort remote control). Above the led you wi...

  • Page 5

    Vm ca350 stereo control amplifier controls precautions connections maintenance and advice technical specifications • only connect the amplifier to a (professionally installed) wall socket with earth or ground and the corresponding voltage setting, as indicated on the back of the amplifier. Any fault...

  • Page 6

    Vm ca350 stereo control amplifier controls precautions connections maintenance and advice technical specifications Î 4 5 6 7 8 9 any faulty connection will invalidate the warranty 4. Input 1. As a standard feature the amplifier has one xlr input, so as to make it a perfect match with the xlr output ...

  • Page 7

    Vm ca350 stereo control amplifier controls precautions connections maintenance and advice technical specifications • on the backside of the amplifier you will find 2 rows of rca-cinch inputs. The upper row is for the left channel and the bottom row is for the right channel. • for your convenience yo...

  • Page 8

    Vm ca350 stereo control amplifier controls precautions connections maintenance and advice technical specifications line amplifier input impedance 50 kohms input voltage max. Unlimited channel separation > 100 db / 1.5 hz - 100 khz distorsion bandwidth 1.5 hz - 100 khz signal / noise ratio > 100 db o...