Digital microscope dmc-1113 user manual features vast digital microscope provides 10~200x adjustable magnification range. The build-in high-performance white led can illuminate the object without using any auxiliary light. Adjust focus knob on the flank, the magnified image can be seen, captured and...
Contents digital microscope device cd user manual stand pc system requirement pentium 4 class cpu 128 mb of system ram one usb 2.0 port or above vga system with at least 16bit color support uvc: windows xp sp2 or above driver installation procedure this device supports “universal video class” driver...
2. Please insert the vp-eye 6.0 software installation cd into cd-rom drive, the software will install automatically. 3. Plug the usb cable into the pc usb port. 4. Click 【 vp-eye 6.0 】 software, image will show up. Specifications subject to change without notice . Vast technologies inc. 3.
5. Put the object near the center position. 6. Please tilt the vast digital microscope slightly when close the object, in order to get 3d image. 7. Vast digital microscope can be used to get the proper image size as the user’s wish. The closer you put vast digital microscope to the object, the bigge...
8. The clear image can be got by adjusting the focus knob as well as changing the distance between the object and vast digital microscope . 9. If the image is blurred, adjust the focus knob to the right end and view the image of the object in lower magnification first. 10. When magnify the image of ...
11. If the object is lumpy or a higher magnification (bigger image) is unnecessary, lift vast digital microscope a little bit and adjust the focus knob to the right slightly until a clear image shows up. 12. If the object is too dark or bright, adjust the light knob to get the light you need. Turn r...
14. Use hardware snap button to capture image. Application software start click 【 vp-eye 6.0 】 then image will show up. Specifications subject to change without notice . Vast technologies inc. 7.
Function key lists: enter the tools window enter this users guide close this program select the snapshot and recording functions select the brightness and contrast level select the zoom-in and zoom-out functions select the input resolution for the video camera select the playback function select the...
Brightness and contrast click the icon on tool bar to select the brightness and contrast level. Set the brightness level to the default value from driver. You may use the scroll bar on the below to adjust the level for brightness. Set the contrast level to the default value from driver. You may use ...
Resolution click the icon on tool bar to select the input resolution(640x480 or 1280x1024). Playback click the icon on tool bar to select the playback function. The playback function can display the capture photo or play the movie on the video screen. Playback the capture photo file or movie file. T...
Select an video effect to add in the real-time video screen, the selected effect will be added in the video screen. It will appear in the photo snapshot and video recording. Special function - time record 1. Click the icon on tool bar. 2. Click the icon. Specifications subject to change without noti...
3. Click the right button of the mouse on tool bar, and quick menu will show up. There has “date time” can be selected. 4. Select “data time” to get time and date which will show on the right corner of the downside of screen. Special function - measurement 1. Click the icon on tool bar. Specificatio...
2. Click the icon. 3. Click the right button of the mouse on tool bar, and quick menu will show up. There has “ruler” can be selected. 4. Select “ruler”. The default setting is “pixel”. Please follow below steps to change the measurement unit to “mm”. Specifications subject to change without notice ...
5. Please put a ruler near the center position of vast digital microscope. 6. Click the right button of the mouse on the screen and quick menu will show up. Select “calibrate 1mm” (or “calibrate 10mm”.) 7. When the “tip” appears, move the cross line and select the first point of calibration. Specifi...
8. Move the cross line and select the second point of calibration. When the “calibration succeeded” tip appears, calibration is completed and the indication will show 1.00mm (or 10.00mm) on the left corner of the downside of screen. (according to your selection, the distance between the first and se...
11. Click the right button of the mouse on the screen, and quick menu will show up. Select”freeze” to get still image for further observation. Special function--full screen a. Ruler double click the left button of the mouse on the screen to get full screen image. Click right button of the mouse on t...
B. Capture click the icon on tool bar and double click the left button of the mouse on the screen to get full screen image. Press the “space key” on the keyboard to capture image. Notice if the image of screen flickers when use the vast digital microscope, please turn the led light off for 1-2 secon...
