VDO CYTEC C 08 Installation And Operation Manual

Summary of C 08

  • Page 1

    English page 1-16 deutsch seite 17-32 français page 33-48 italiano pagine 49-64 español pagina 65-80 nederlands pagina 81-96 gb c 08 d c 08 f c 08 i c 08 e c 08 nl c 08.

  • Page 2

    Etrto ws in mm kmh ws in inch mph 47-305 16x1,75 1272 50,1 47-406 20x1,75 1590 62,6 34-540 24x1 3/8 1948 76,7 47-507 24x1,75 1907 75,1 23-571 26x1 1973 77,7 40-559 26x1,5 2026 79,8 44-559 26x1,6 2051 80,7 47-559 26x1,75 2070 81,5 50-559 26x1,9 2089 82,2 54-559 26x2,00 2114 83,2 57-559 26x2,125 2133 ...

  • Page 3

    Gb c 08 1 installation and operation manual - vdo cytec c 08 preface thank you for buying a vdo cytec bicycle computer. The more familiar you get with this model, the more enjoyable your trips are going to be. Please read thoroughly all the information provided in this manual. You are getting import...

  • Page 4

    Gb c 08 2 2. Mounting the speed transmitter the sensor should be mounted on the same side of the fork as the holder is on the handlebar. Watch out: do not tighten the cable ties yet! Accurately position the spoke magnet and the sensor first, then tighten the cable ties. 3. Mounting the spoke magnet ...

  • Page 5

    Gb c 08 3 1-5mm 1-5mm in case this distance is not achievable in the current positioning, slide the sensor and the magnet on the fork or spoke accordingly. 4. Twist-click mounting of computer onto holder the twist-click mounting has been exclusively developed for the new line of vdo cytec computers....

  • Page 6

    Gb c 08 4 open close gb c 08 5. Installing battery into computer head to save battery power, your vdo cytec comes with the battery not yet fitted. Prior to initial use you have to install the battery first. If you find the computer is not functioning properly after a battery change, push the ac-butt...

  • Page 7

    Gb c 08 5 6. Information features of your vdo cytec c 08 your vdo cytec c 08 provides you with following information: kmh-mph current speed indicated in either kmh or mph, featuring automatic conversion into mph trp trip counter, counts your trip distance up to 999,99 km or miles. Rid trip timer, ke...

  • Page 8: Function

    Gb c 08 6 7. Operating your vdo cytec c 08 button / key covering your vdo cytec c 08 has 2 buttons / keys mode 1, mode 2 function trp rid avs max mode 1 function clk odo mode 2.

  • Page 9

    Gb c 08 7 these buttons / keys have several functions. All functions of the respective buttons / keys outlined in the following chart below. Your display button / key length of what is going on? Indicates following to be pushed pushing the information button / key trp-avs-rid-max mode 1 brief (0.1 s...

  • Page 10

    Gb c 08 8 press mode 1 1,5 sec. Start scroll scroll your current speed is faster than your average speed. Accuracy +/- 1 kmh/mph you are currently riding as fast as your average speed. Accuracy +/- 1 kmh/mph your current speed is slower than your average speed. Accuracy +/- 1 kmh/mph gb c 08 8. Scro...

  • Page 11

    Gb c 08 9 11. Entering your wheelsize your vdo cytec identifies wheelsize as ws = wheelsize. Following default is entered wheelsize = ws = 2155 mm watch out: above default is automatically applied after a battery change. After a battery change, the correct wheelsize for your bike has to be re-entere...

  • Page 12

    Gb c 08 10 ws in mm / inch 1x programming (setting up) your wheelsize step 1: call trp information in your display. Step 2: press mode 1 button for 5 sec. "ws" is displayed along with an alternating flashing symbol for kmh and mph. Step 3: by pressing the mode 2 button you can choose whether you wan...

  • Page 13

    Gb c 08 11 mode 2 0,1sec. To change from kmh to mph mode 2 0,1sec. To increase mode 1 5sec. Mode 1 5sec. To quit mode 1 0,1sec. Switch to next mode 1 0,1sec. Switch to next mode 1 0,1sec. Switch to next mode 1 0,1sec. Switch to next mode 2 to increase to change from kmh to mph mode 1 to start to swi...

  • Page 14

    Gb c 08 12 mode 2 0,1sec. Mode 2 mode 1 0,1sec. Switch to next mode 2 0,1sec. To increase mode 1 0,1sec. Switch to next mode 1 5sec. To quit mode 1 5sec. To start mode 1 0,1sec. Switch to next gb c 08 12. Setting the clock clk your vdo cytec c 08 features a clock with hour and minute display. 12 h o...

  • Page 15

    Gb c 08 13 mode 1 5sec. To quit mode 1 0,1sec. Switch to next mode 2 0,1sec. To increase mode 1 5sec. 13. Programming (setting-up) your odometer odo you can enter individual odometer values into your vdo cytec c 10 at any time, i.E. Transferring data from your old computer into your new vdo cytec c ...

  • Page 16

    Gb c 08 14 hg 15. Stand-by-mode your computer vdo cytec c 08 features a stand-by-mode in order to save battery power. Your computer changes into stand-by-mode if it has not received any speed impulses for 5 min or no button has been pressed in the same period of time. The time of day (clk) is still ...

  • Page 17

    Gb c 08 15 malfunction possible cause solutions irregular lcd readout (i.E. After battery change) speed display does not appear check for proper distance between sensor and magnet cable from sensor to computer broken check cable and replace if necessary. Computerhead is incorrectly twisted on place ...

  • Page 18

    Gb c 08 16 gb c 08 18. Warranty we warrant vdo cytec models (sensor, computer head and handlebar holder) to the original purchaser for five years from date of purchase against defects in material and workmanship. This does not cover the batteries and defects resulting from normal wear and tear, impr...