VoiceStar VS610 User Manual
Comfort. Clarity. Quality.
Comfort. Clarity. Quality.
Wearing the Headset
1. Snap the earhook onto the neck of earbud.
2. Slide the earhook over your ear and insert
the earbud into either ear. Point the built-in
microphone toward your mouth and adjust
the headset angle until you feel comfortable.
Note:
To wear the headset on your other ear,
disconnect the earhook and re-attach it
facing in the other direction.
Please read this user’s guide before installing, setting up
and using your new headset.
www.radioshack.com
Thank you for purchasing VoiceStar VS610
Bluetooth Headset from
RadioShack.
Your
Bluetooth Headset enables comfortable handsfree
communication with a compatible mobile phone.
The VS610 can communicate with a wide range of
devices, such as mobile phones, PDAs, using two
audio profiles: Bluetooth
HEADSET and Bluetooth
HANDS-FREE.
Note:
Please check your device’s owner’s manual
for information about supported Bluetooth
features and functions.
Step 2: Turning On the Headset
To turn on the headset, press and hold the
TALK
button
for about 5 seconds until the headset beeps once and
the status indicator lights blue briefly.
To turn off the headset, press and hold the
TALK
button
for 2 seconds until the headset beeps once and the
status indicator lights red briefly.
VoiceStar VS610 Bluetooth Headset
17-1117
VoiceStar VS610 Bluetooth
®
Headset
17-1117
Step 1: Charging the Battery
Connect the AC adapter’s mini USB plug to the
headset and connect the adapter to a power
source. A red light indicates charging.
Charge the headset for about 2 hours before
using.
The headset provides up to 8 hours
talking time and up to 200 hours standby time
after a full charge.
When fully charged, the status-indicator light
turns off.
Unplug the charger adaper from the
AC outlet and headset.
Step 3: Pairing the Headset
The VS610 can pair with up to eight devices. If you try to pair the headset with more than eight devices,
the device used least recently will be deleted.
To pair the VS610 with a device:
1. Hold down both volume buttons (
+
and
–
) until the status indicator flashes red and blue repeatedly.
2. Make sure the headset is within 33 feet of the device, when paring.
3. Use your device’s Bluetooth
®
menu to search for the headset.
For the device-paring feature for your
mobile phone, please refer to your phone’s user’s guide.
If the device requests a passkey, enter
0000
.
The headset beeps once and every 8 seconds the status indicator flashes blue twice. Your headset is
ready to make and receive calls.
Note:
Before pairing, blue light on headset will flash every 5 seconds when you power on the headset.
What’s Included
•
Bluetooth Headset
•
AC Battery Charger
•
Earhook
•
Earbuds (2) (15 mm and 18 mm diameter)
•
User’s Guide
Limited 90-day Warranty
This product is warranted by
RadioShack
against manufacturing
defects in material and workmanship under normal use for ninety
(90) days from the date of purchase from
RadioShack
company-
owned stores and authorized
RadioShack
franchisees and dealers.
For complete warranty details and exclusions, check with your local
RadioShack
store.
RadioShack
Customer Relations
300 RadioShack Circle, Fort Worth, TX 76102
04/04
Earhook
Snap the earhook onto
the neck of the earbud.
Earbud
Attach the 15mm or
18 mm earbud.
+ / – (Volume)
Press to increase or
decrease the volume.
TALK
Use to turn the headset on
and off, and to manage calls.
Status Indicator
Status Indicator
AC adapter
USB plug
USB Charger
Socket
Built-in
microphone
Step 4: Answering Calls
The VS610 sounds an alert for incoming calls. To answer the call, press the
TALK
button. To hang up,
press the
TALK
button again. To reject a call, press the
TALK
button twice.
Notes:
•
Audio tones can be heard only when wearing the headset.
• You can also answer and end the call through the mobile phone.
• Some phones offer Auto Answer function and may be used with the headset or speakerphone, but
this is a phone-dependent feature. Please refer to the manual of your phone for that function.