WAFER GSM-HOUSE Operating Instructions Manual - page 12
WAFER GSM-HOUSE INTERCOM UNIT
http://www.waferstar.com
#GSM Intercom function and config command
1. Add the phone number for the inter calling
#PWD123456#DIAL01=180122333 and #PWD123456#DIAL02=181323344
Reply:
DIAL01 SET TO 122333 OK
Reply:
DIAL02 SET TO 323344 OK
Inquiry the intercom calling number in the memory
#PWD123456#DIAL=ALL?
You will receive a Acknowledge with: DIAL IS 180122333:181323344:
2. Customize the keypad button for release the out1 and out2
#PWD123456#RELEASE1=1
Reply: RELEASE1=1 OKAY
#PWD123456#RELEASE2=2
Reply: RELEASE2=2 OKAY
You only need to input one number,but every time,you need press more than twice to release the
output.for the Above setting ,then everytime during inter calling,you can press the button 1 twice
to release OUT1 and press the button2 to release the OUT2
Check the config information of the release button
#PWD123456#RELEASE?
You will receive a Acknowledge with:
RELEASE1=1,RELEASE2=2
3. Inter calling audio volume adjust
During phone calling,press the button * or # to increase or decrease the audio volume.