Wallpro Supa Mixer PM-600 Operating Instructions Manual - page 11

Summary of Supa Mixer PM-600

  • Page 1

    Operating instructions model pm-600 supa mixer tm.

  • Page 2

    Model no pm-600 voltage 220-240v / 50hz power 1200w no-load speed 0-680 min -1 mixing paddle dia. Max 140mm coupling thread m14 x 2 protection class view of the major components & accessories technical specifications a - switch for on/off b - lock-on button and speed control c - spindle d - mixing p...

  • Page 3: Warning!

    General safety rules warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all the warnings and instructions for future reference. The term “power tool” in the warnings refers to your mai...

  • Page 4: Warning!

    General safety rules (continued) safety instructions for electric stirrer machines warning! Read and understand all instructions. Do not attempt to use the tool until you have read thoroughly and understand the operator’s manual completely. Pay close attention to the safety rules including dangers, ...

  • Page 5: Before Using This Tool

    Safety instructions for electric stirrer machines (continued) before using this tool warning : some dust created by the power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of the...

  • Page 6: Know Your Machine.

    Safety instructions for electric stirrer machines (continued) to reduce the risk of injury from jams, slips or thrown pieces • to reduce the risk of burns or other fire damage, never use the machine near flammable liquids, vapors or gases, • keep work area clean. Cluttered areas and benches invite a...

  • Page 7: Warning :

    Safety instructions for electric stirrer machines (continued) safe use instruction warning : the operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning tool operation, always wear safety goggles of safety glasses...

  • Page 8

    Basic operation • on/off • switch locking for continuous use ! Be aware of the forces that occur as a result of jamming; hold the tool firmly with both hands and take a secure stance 2 3 4 2 3 • speed control for smooth starting 4.

  • Page 9

    Operating the tool ! Ensure that the tool is switched off d2 d1 e e ! Switch the tool off only when the mixing paddle is in the mixing container ! While working, always hold the tool at the grey-coloured grip area(s) ! Always hold the tool firmly with both hands • mount mixing paddle e onto spindle ...

  • Page 10

    No parts name qty pm6-1 screw 19 pm6-2 back cover 1 pm6-3 brush holder 2 pm6-4 carbon brushes 2 pm6-5 carbon brushes cap 2 pm6-6 housing 1 pm6-7 bearing (608) 1 pm6-8 cable plate 1 pm6-9 screw 2 pm6-10 capacity 1 pm6-11 stator 2 pm6-12 screw 2 pm6-13 rotor insulator 1 pm6-14 rotor 1 pm6-15 bearing 1...

  • Page 11

    No parts name qty pm6-17 spring 1 pm6-18 switch 1 pm6-20 handle cover 1 pm6-22 o-ring washer 1 pm6-23 middle cover 1 pm6-24 paper washer 1 pm6-25 needle bearing 1 pm6-26 circlip 1 pm6-27 bearing (627) 1 pm6-28 secondary gears 1 pm6-29 large gears 1 pm6-30 bearing (607) 1 pm6-31 elastic collar 15 1 p...

  • Page 12

    Environtment symbols • do not dispose of electric tools, accessories and packaging together with household waste material • on the product, the rating label and within these instructions you will find among others the following symbols and abbreviations. Familiarise yourself with them to reduce haza...

  • Page 13: Warranty Claim Procedure.

    Warranty wallboard tool co pty ltd warrants that this product will be free from any defect in materials or workmanship for twelve (12) months from your purchase date (noted on your invoice or receipt). At its discretion, wallboard tool co pty ltd will either repair or replace your product, if it is ...

  • Page 16

    Customer service 1300 653 177.