Wallpro Supa Mixer PM-600 Operating Instructions Manual - page 9
Operating the tool
!
Ensure that the tool is switched off
D2
D1
E
E
!
Switch the tool off only when the mixing paddle is in the mixing container
!
While working, always hold the tool at the grey-coloured grip area(s)
!
Always hold the tool firmly with both hands
•
mount mixing paddle E onto spindle D as illustrated
•
connect plug to power source
•
ensure the mixing container is securely positioned on the floor
•
dip the mixing paddle into the substance to be mixed
•
set wheel B to low speed
•
switch on the tool
•
gradually increase the mixing speed by turning wheel B to the desired maximum speed (so that the
substance will not splash around and the tool will not be overloaded)
•
Electronic soft-start
Ensures reaching the maximum speed smoothly without a sudden impact when tool is switched on
• Holding and guiding the tool !
5
5
!
Disconnect the plug before cleaning
Maintenance / Service
•
Always keep tool and cord clean (especially the ventilation slots)
- always clean the mixer and functional parts after your mixing work
- clean the tool with a dry, soft cloth (do not use cleaning agents or solvents)
- clean ventilation slots regularly with a brush or compressed air