Wasp WPA 1000II User Manual

Summary of WPA 1000II

  • Page 1

    Wasp wpa 1000ii.

  • Page 2

    © 2011 by wasp technologies. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from wasp technologies. This includes electronic or mechanical means, such as photocopying, recording, or infor...

  • Page 3: Battery Notices

    I wpa 1000ii user manual battery notices the wpa 1000ii is equipped with a lithium-ion battery pack and backup battery. Both batteries will discharge after an extended period of not being used. When both batteries are discharged, recharge the unit for 4.5 hours in order to fully charge the main batt...

  • Page 4: Battery Charge Notice

    Ii wpa 1000ii user manual battery charge notice it is important to consider the environment and temperature when charging your battery. Charging is most efficient at normal room temperature or in a slightly cooler environment. It is essential that batteries are charged within the stated range of 0°c...

  • Page 5: Table of Contents

    Iii wpa 1000ii user manual table of contents chapter 1 - getting started ........................................................................... 1 1.1 introducing the wpa 1000ii ................................................................ 1 1.2 wpa 1000ii product introduction & accessory kit...

  • Page 6

    Iv wpa 1000ii user manual chapter 5 - advanced settings ................................................................... 20 5.1 performing a hardware reset ...........................................................20 5.1.1 performing a warm boot .....................................................

  • Page 7: Chapter 1 - Getting Started

    1 wpa 1000ii user manual chapter 1 - getting started 1.1 introducing the wpa 1000ii thank you for purchasing the wpa 1000ii mobile computer. Your wpa 1000ii was designed for users who need a compact and durable portable computer for data collection and real time transactions. The wpa 1000ii mobile c...

  • Page 8

    Wpa 1000ii user manual 1.2 wpa 1000ii product introduction & accessory kit the following accessories are included with the wpa 1000ii: wpa 1000ii terminal power adapter* battery pack stylus with bungee lanyard usb charging cable usb docking station (optional) qrg/um cd-rom * replaceable clip plugs a...

  • Page 9: 1.3 Tour of The Wpa 1000Ii

    Wpa 1000ii user manual 1.3 tour of the wpa 1000ii the following section describe the main components and features of the wpa 1000ii. Front view no. Component description 1 barcode laser scanner (optional) reads and captures information on a barcode label. 2 status indicator indicates the battery cha...

  • Page 10

    Wpa 1000ii user manual includes a software keyboard button, navigation key and application buttons to launch microsoft outlook mobile programs. 6 keypad 7 (reserved) 8 left scanner trigger key press to activate the barcode laser scanner. 9 cord holder eyelet for holding the elastic bungee lanyard. 4...

  • Page 11: 1.4.1 Installing The Battery

    Wpa 1000ii user manual 1.4 setting up the wpa 1000ii perform the following set up tasks to begin using your device:  install the battery pack.  charge your device.  power on the wpa 1000ii 1.4.1 installing the battery warning! There is a risk of fire and burns if the battery pack is handled impro...

  • Page 12

    Wpa 1000ii user manual 3. If you remove the main battery and plug it back in before the backup battery lost power, wpa 1000ii will warm start. 4. If you remove the main battery and plug it back after the backup battery lost power, wpa 1000ii will clean boot. 1.4.2 charging the wpa 1000ii for initial...

  • Page 13

    Wpa 1000ii user manual to charge the device using the docking station: 1. Plug the ac adapter cable into the power jack on the docking station. 2. Plug the ac adapter into an electrical outlet. 3. Slide the device into the docking station until it clicks into place. The connection is secure when the...

  • Page 14

    Wpa 1000ii user manual note: the wpa 1000ii screen ships with a protective plastic film. You may remove it by peeling from one corner. The screen will be more susceptible to scratching without the film, but will be more readable. The wpa 1000ii welcome screen appears. The windows mobile screen will ...

  • Page 15: 2.1 Using The Keypad

    Wpa 1000ii user manual chapter 2 - using the hardware 2.1 using the keypad the wpa 1000ii keypad has a navigation key and six special keys to launch particular applications and display the on-screen keyboard. 3 2 1 6 5 4 8 7 no. Button name description 1 esc press the esc button to exit from the sec...

  • Page 16: 2.2 Using The Stylus

    Wpa 1000ii user manual 2.2 using the stylus caution! Never use anything other than a wpa 1000ii stylus on the screen; using a different device may cause permanent damage. 1. Push the stylus in the direction of the arrow, then pull out to remove the stylus from its holder. 2. Hold the stylus like hol...

  • Page 17: 2.3 Using The Sdio/mmc Slot

    Wpa 1000ii user manual 2.3 using the sdio/mmc slot your device has an expansion slot compatible with a range of sd, sdio, and mmc storage cards, which are primarily used to back up or transfer files and data. To insert a storage card: 1. Hold the device securely, and then lift the rubber cover from ...

  • Page 18: 3.1 Est

    Wpa 1000ii user manual chapter 3 - getting connected the wpa 1000ii enables users to link to a host computer using an rs-232, or ablishing device-pc connection bluetooth, wifi, and gprs connection for data communication. This chapter provides an overview of wpa 1000ii communication options. 3.1 est ...

  • Page 19: Wifi Connection

    Wpa 1000ii user manual notes: if activesync doesn’t start automatically, click start → programs → a message appears indicating that it is unable to detect a connection, click microsoft activesync. If the cancel button and manually configure the communication settings. 4. Follow the on-screen instruc...

  • Page 20

    Wpa 1000ii user manual it client utility window appears. Admin login 1. Tap start → setting → system → wi-fi. The summ 14 2. To login as an administrator, tap admin login. 3. Enter the admin password. (default password: summit).

  • Page 21

    Wpa 1000ii user manual can available ap . Under profile tab, tap scan for available ap. S 1 15 2. You may select a desired ap to create a new profile. Tap configure. 3. Tap yes to create the new profile. 4. Enter the wep key or network key. Tap ok..

  • Page 22

    Wpa 1000ii user manual commit and activate 1. Tap commit to activate the setting. 2. Under main tab, select the profile you want to activate. 3. Under status tab, you can see the ip address, signal strength and quality. 4. Tap ok to exit the summit client utility. 5. Tap start → boot-mode. Tap warm ...

  • Page 23: 4.1 Scanner Setting

    Wpa 1000ii user manual chapter 4 - barcode scanner programs the wpa 1000ii provides an option for the barcode scanner, allowing you to scan and decode various types of 1d/2d barcodes. 4.1 scanner setting the user can change the default barcode symbology using the scanner control panel. From the scan...

  • Page 24

    18 wpa 1000ii user manual 4.3 barcode symbologies barcode symbology enable / disable char check / digit verification transmit check char/digit others australian post yes send bar width data british post yes canadian post yes codabar yes yes yes transmit start & stop char, *data length code 11 yes ye...

  • Page 25

    19 wpa 1000ii user manual barcode symbology enable / disable char check / digit verification transmit check char/digit others (databar) upc a yes yes 2 digit addenda, 5 digit addenda, addenda required, include addenda separator, send number system upc e yes yes 2 digit addenda, 5 digit addenda, adde...

  • Page 26

    Wpa 1000ii user manual chapter 5 - advanced settings 5.1 performing a hardware reset you may have to perform a reset if the device freezes (i.E., the device no longer responds to the buttons or tapping on the screen). A soft reset allows your device to get a fresh start, similar to rebooting a compu...

  • Page 27

    Wpa 1000ii user manual method 1: from windows mobile 1. Tap start → bootmode. The bootmode screen appears. 2. Tap cold boot. The system is reset and you will lose all data including all files in the ram memory. Method 2: from hardware 1. Remove the battery compartment cover and the main battery. See...

  • Page 28

    22 wpa 1000ii user manual appendix i - system specifications system cpu: marvell pxa320 processor, 806mhz mobile ddr ram: 256mb nand flash ram: 512mb os: windows embedded handheld 6.5 classic display transflective color 3.5” qvga with backlight 240×320 touch panel lcd keypad 4 function keys + naviga...

  • Page 29

    23 wpa 1000ii user manual environmental operating temperature: 14°f to 122°f (-10°c to 50°c) storage temperature: -4°f to 140°f (-20°c to 60°c) charging temperature: 32°f to 104°f (0°c to 40° c) relative humidity: 5% ~ 95% (non-condensing) drop test to concrete: 3 feet ( 90 cm) on 6 faces/4 corners ...