Watchman 7820-A Installation Manual

Summary of 7820-A

  • Page 1

    Wolo watchman models - page 1 your purchase of a wolo warning light is the perfect choice to compliment your vehicle. Wolo’s warning lights are manufactured with the finest materials. Before being packaged, each light is tested to meet our high standards and ensure a perfect working light. Our quali...

  • Page 2

    Wolo watchman models - page 2 4. Drill an 11/16“ hole into the roof, which will be the access point to route the cables into the interior of the vehicle (when at step number 13). Mark the desired hole location; remove the light bar from the roof and drill the hole. The installer must lower the headl...

  • Page 3

    Wolo watchman models - page 3 12. Place the weather-stripping back into position. 13. Insert the cables and the red and black wires into the access hole that was drilled into the roof earlier. Route the cables into the b-pillar. 14. The power cable will make an approximate 90° bend into the b-pillar...

  • Page 4

    Wolo watchman models - page 4 important: the red wire must be connected to the 15amp inline fuse (included with light bar) at the point of the 12-volt connection such as the fuse block, the vehicle’s battery or any 12-volt power source which is rated by vehicle’s manufacturer capable of handling 15-...

  • Page 5

    Wolo watchman models - page 5 specifications dimensions: l 47 in. X w 4-5/8 in. X h 3-3/4 in. Voltage: 10.8 ~ 13.8-vdc peak current: all leds powered on 4.04 -amps / warning light only powered on 2.80-amps led type: linear with magnifying lens, each module contains 6 x 1.5-watt leds 102 / 1.5-watt 1...