Installation procedure 1. Identify installation location for water softener. Piping should be such that all household water, with the exception of outside hydrants, flows through softener. A hard water line may be run to a kitchen tap if so desired. This system and installation must comply with stat...
Start-up procedure 1. Filling the mineral tank with water: turn the manual regeneration knob until “backwash” appears in the program window. Slowly turn bypass valve to the service position, allowing for water to fill the tank. When tank is full and all air has been bled from the system, water will ...
Warranty / maintenance information all brassmaster water softeners feature the assured performance modular (apm) design. If you experience a failure of any valve component, the brass module can be easily removed and replaced with a factory remanufactured replacement module. To remove module, index t...
