Quick start guide.
Atom quick start guide w e l c o m e t o y o u r w a t t b i k e a t o m 01 this guide will show you how to build and setup your atom, connect your devices and give you tips to get the most from your atom’s features..
Atom quick start guide 02 i n t h e b o x – 2, 4, 5, 6 and 8mm allen keys – power adaptor – combination pedals – device holder – tri-bars – atom tri-pads – atom.
03 f e a t u r e s device holder shifter handlebar lever handlebar adjuster saddle lever saddle adjuster power inlet and on/off button.
Atom quick start guide 1 remove the atom and its accessories from the packaging. 2 a screw the right pedal onto the right crank. Tighten clockwise securely using a 6mm allen key. 2 b screw the left pedal onto the left crank. Tighten anti-clockwise securely using a 6mm allen key. 3 a take the two tri...
S e t u p use the corresponding levers and adjusters to set up the atom to your preferred cycling position. Make all adjustments off the bike. 1 raise or lower your saddle height using the lever on the rear of the saddle stem. Loosen the lever to adjust the stem and tighten to secure. 2 adjust your ...
Once your atom is set up, you’ll need to link your devices before you can start riding. 1 turn your devices bluetooth™ on. 2 download the wattbike app from your app store. 3 open the app, login or sign up. To connect your atom: • tap just ride • tap the top right corner ( f i g 0 3 ) • select your a...
Atom quick start guide 06 s t o r a g e after each session, wipe any sweat, water or foreign objects from the atom. If you need to store your atom, make sure it is unplugged and use the wheels to guide it to a safe place. A d d i t i o n a l r e s o u r c e s for more information and full set up gui...
Wb17_0037 w a t t b i k e . C o m @wattbike /wattbike /wattbike /wattbike.
