X-Core Technology XCH17WM Service Manual - page 4
Switch Definition
SET button
Press to display the menu. In the menu, this button functions as “ENTER”.
UP & DOWN buttons
Press to select the item of menu.
LEFT & RIGHT buttons
Press to change the item value.
Size Dimension
DOWN button
LEFT SET RIGHT
button button button
UP button
⑥
Unit: mm
Menu Operation
‧ Press the SET button to display the menu on screen.
‧ Press the UP or DOWN button to select the item.
‧ Press the LEFT or RIGHT button to change mode.
‧ The ENTER symbol means there is a sub-menu. Press the SET button to enter
to the sub-menu.
‧
Select the EXIT item and press the SET button to finish setting.
1. LENS
2. EXPOSURE
3. WHITE BAL
4. DAY&NIGHT
5. NR
6. SPECAIL
7. ADJUST
8. RESET
9. EXIT
1. LENS
To select the lens mode depending on the lens used:
‧ MANUAL When manual iris lens is used.
‧ DC
When auto iris lens that requires a DC drive signal is used.
Select MODE between INDOOR; OUTDOOR.
2. EXPOSURE
¾ SHUTTER
To change the shutter setting and speed based on the environment.
‧ AUTO
After an immobile brightness value is set, the shutter speed
will adjust automatically to achieve the value.
‧ FLK
Select when flickering occurs on the screen due to an
Imbalance
between
illumination and frequency. Under this
mode, the shutter speed is NTSC: 1/100; PAL: 1/120.
‧ Fixed Speed
adjustable: 1/30; 1/60; 1/250; 1/500; 1/1000; 1/2000;
1/5000; 1/10000; 1/50000; X2; X4; X6; X8; X10; X15; X20;
X25;
X30
¾ AGC (Auto Gain Control)
Use this function to heighten the brightness signal automatically.
‧ HIGH
LOW; MIDDLE adjustable.
SETUP
1. LENS
MANUAL
2. EXPOSURE
3. WHITE BAL ATW
4. DAY&NIGHT AUTO
5. NR
6.
SPECIAL
7. ADJUST
8. RESET
9. EXIT
SPECIAL
CAM TITLE
OFF
D-EFFECT
MOTION OFF
PRIVACY OFF
LANGUAGE
ENG
DEFECT
RS485
VERSION
120405
RETURN
RET
⑦