Summary of VATA2020
Page 1
Product user manual ip-gateway model: vata2020 version：v1.0.60.16.
Page 2
Safety notices please read the following safety notices before installing or using this gateway. They are crucial for the safe and reliable operation of the device. Please use the external power supply that is included in the package. Other powers supplies may cause damage to the device, affect the ...
Page 3
Table of content 1. W elcome to the vata2020 single port gateway ......................................................................... 4 1.1. Package contents ....................................................................................................................... 4 2 u nderstandin...
Page 4
1. Welcome to the vata2020 single port gateway 1.1. Package contents please check your product packaging ，it includes: 1. One vata2020 single port gateway 2. A group of cable 3. A power adapter note: if you use the non-vata2020 single port gateway comes with a power adapter, single port gateway vata...
Page 5
2 understanding of a single port gateway vata2020 vata2020 single-port gateway ip-based voice media access device is designed for operators, enterprises, residential users, and residential voip solution to provide network equipment. Vata2020 single port gateway into the analog voice information tran...
Page 6
2.1. The vata2020 single port gateway 2.2. Indicator signs name meaning description powe r power led always light, has power, you can start using the vata2020 single port gateway. Reg registration status indicator registered, the lights lit, the registration fails, the light flashes; do not use note...
Page 7
Lan lan network interface lights indicator light, lan port connected to the network. Flashing: data transfer. 2.3. Connector description name meaning description powe r power switch output:12vdc ，500ma。 line lifeline pstn access lines. Phone fxs interface ordinary telephone connection, or switch int...
Page 8
3. Getting started before you start using the vata2020 single port gateway, please install the following: 3.1. Connect the power and network 3.1.1. Connect the network during this step, make sure your environment already have broadband internet access capability. 1. Broadband router direct network c...
Page 9
3.1.2. Connect the power during this step, make sure your power supply connector and a single port gateway vata2020 outlet match, while vata2020 is also in line voltage and current required for a single port gateway. 1. The transformer connected to the dc port on the back of vata2020 single port gat...
Page 10
4. Vata2020 basic operation of a single port gateway phone 4.1. Call transfer blind transfer during a call, press flash (flash) key, enter the number to be transferred * add and press 【#】 key to confirm, you can transfer the current call to third parties. (to use this feature, you must enable the ga...
Page 11
Button again, you can switch back. You also can send and receive on one side, then the party can not be retained to hear your conversation, the speaker you can not. (to use this feature, you must enable the gateway of the call waiting feature) 4.3. With the pstn user calls * t mapping shows that whe...
Page 12
5. Web configuration 5.1. Introduction of configuration 5.1.1. Ways to configure vata2020 gateway has three different ways to different users. Use phone keypad. Use web browser （recommendatory way）. Use telnet with cli command. 5.1.2. Password configuration there are two levels to access to phone: r...
Page 13
Note: after you configure the gateway, you need click save button in config under maintenance in the left catalog to save your configuration. Otherwise the device will lose your modification after power off and on. 5.3. Configuration via web 5.3.1. Basic 5.3.1.1. Status status field name explanation...
Page 14
5.3.1.2. Wizard wizard field name explanation please select the proper network mode according to the network condition. Vata2020 gateway provide three different network settings: static: if your isp server provides you the static ip address, please select this mode, and then finish static mode setti...
Page 15
Display name set the display name. Server address input your sip server address. Server port set your sip server port. User name input your sip register account name. Password input your sip register password. Phone number input the phone number assigned by your voip service provider. Enable registe...
Page 16
5.3.2. Network 5.3.2.1. Wan config wan config field name explanation active ip the current ip address of the gateway. Current netmask the current netmask address. Mac address the current mac address of the gateway. Current gateway the current gateway ip address. Get mac time shows the time of gettin...
Page 17
If you use static mode, you need set it. Ip address input the ip address distributed to you. Netmask input the netmask distributed to you. Gateway input the gateway address distributed to you. Dns domain set dns domain postfix. When the domain which you input can not be parsed, gateway will automati...
Page 18
Lan config field name explanation lan ip specify lan static ip. Netmask specify lan netmask. Dhcp service select the dhcp server of lan port or not. After you modify the lan ip address, gateway will amend and adjust the dhcp lease table and save the result amended automatically according to the ip a...
Page 19
In chart 1, there is a layer 2 switch without setting vlan. Any broadcast frame will be transmitted to the other ports except the send port. For example, a broadcast information is sent out from port 1 then transmitted to port 2,3and 4. In chart 2, red and blue indicate two different vlans in the sw...
Page 20
Add voice vlan id, and other data packets will add data vlan id; data untagged means after using vlan, only voip packets will add voice vlan id. Other data packets will not use vlan. Diffserv enable select it or not to enable or disable diffserv. Diffserv value set diffserv value, the common value i...
Page 21
Service port field name explanation http port set web browse port, the default is 80 port ，if you want to enhance system safety ，you'd better change it into non-80 standard port ； example: the ip address is 192.168.1.70. And the port value is 8090, the accessing address is http://192.168.1.70:8090 t...
Page 22
Dhcp server field name explanation dhcp leased table ip-mac mapping table. If the lan port of the gateway connects to a device, this table will show the ip and mac address of this device. Shows the dhcp lease table ， the unit of lease time is minute. Lease table name specify the name of the lease ta...
Page 23
Dns relay apply button to become effective. Notice: 1 ）the size of lease table can not be larger than the quantity of c network ip address. We recommend you to use the default lease table and not modify it. 2 ）if you modifies the dhcp lease table, you need save the configuration and reboot. 5.3.2.6....
Page 24
Sip config field name explanation choose line to set info about sip, there are 3 lines to choose. You can switch by 【load】 button. Register status shows if the gateway has been registered the sip server or not; or so, show unapplied; server name set the server name. Server address input your sip ser...
Page 25
Proxy server address set proxy server ip address （usually, register sip server configuration is the same as proxy sip server. But if your voip service provider give different configurations between register sip server and proxy sip server, you need make different settings. ） proxy server port set yo...
Page 26
Interval time, and has no packets sending to device in private network to keep nat alive, user could set this function on. It need set the keep alive interval time less than the nat server’s. Enable via report enable/disable system to support rfc3581. Via report is special way to realize sip nat. En...
Page 27
Rfc privacy edition set anonymous call out safely; support rfc3323and rfc3325; subscribe expire time overtime of resending subscribe packet. Suggest using the default config. Enable conference number set to use sever conference. Mwi number input the number of the server's voice-mail box click to tal...
Page 28
Stun field name explanation stun nat transverse shows stun nat transverse estimation, true means stun can penetrate nat, while false means not. Stun server addr set your sip stun server ip address stun server port set your sip stun server port stun effect time set stun effective time. If nat server ...
Page 29
After we make a setting according to this dial rule. For example, you want to dial 01062213123, but you need dial only 162213123 to realize your long distance call after you make this setting. To save the memory and avoid abundant input of user, add the follow functions: 1 、x match any single digit ...
Page 30
Phone number to realize calling to what the phone number is mapped. In the prefix matching, you need input your desired prefix number and t; then dial the prefix and a phone number to realize calling to what your prefix number is mapped. The prefix number supports at most 30 digits destination set d...
Page 31
That starts with your set phone number will be sent via sip2 line after the first several digits of your dialed phone number are deleted according to delete length. This setting will realize speed dial function, after you dialing the numeric key “2”, the number after all will be sent out. When you d...
Page 32
If your dialed phone number starts with your set phone number. The phone will send out your dialed phone number adding suffix number. When you dial “147”, the sip1 server will receive “1470011” 5.3.4. Phone 5.3.4.1. Dsp config in this page, you can configure voice codec, input/output volume and so o...
Page 33
Ring volume specify ring volume grade g722 timestamps 160/20ms or 320/20ms is available g723 bit rate 5.3kb/s or 6.3kb/s is available default ring type set up the ring by default signal standard select signal standard. Vad select it or not to enable or disable vad. If enable vad, g729 payload length...
Page 34
Transfer enable call waiting enable call waiting by selecting it. Enable three way call enable three way call accept any call if select it, the phone will accept the call even if the called number is not belong to the phone. Black list set add/delete black list. If user does not want to answer some ...
Page 35
3). Time out: after you stop dialing and waiting time out, system will send the number collected. 4). User defined: you can customize digital map rules to make dialing more flexible. It is realized by defining the prefix of phone number and number length of dialing. In order to keep some users' seco...
Page 36
Cause extensions 1000-8999 to be dialed immediately cause 8 digit numbers started with 9 to be dialed immediately cause 911 to be dialed immediately after it is entered. Cause 99 to be dialed after 4 seconds. Cause any number started with 9911 to be dialed 4 seconds after dialing ceases. Notice: end...
Page 37
Config encrypt key input the encrypt key, if the configuration file is encrypted. Protocol type select the protocol type ftp 、tftp or http. Update interval time set update interval time, unit is hour. Update mode different update modes: 1. Disable: means no update 2. Update after reboot: means updat...
Page 38
Mgr log level set the level of mgr log. Sip log level set the level of sip log. Iax2 log level set the level of iax2 log. Enable syslog select it or not to enable or disable syslog. 5.3.5.3. Config setting config setting field name explanation save config you can save all changes of configurations. ...
Page 39
Update field name explanation web update click the browse button, find out the config file saved before or provided by manufacturer, download it to the gateway directly, press “update” to save. You can also update downloaded update file, logo picture, ring, mmiset file by web. Server set the ftp/tft...
Page 40
Account configuration field name explanation keyboard password set the password for entering the setting menu of the gateway by the phone key board. The password is digit. This table shows the current user existed. User name set account user name. User level set user level, root user has the right t...
Page 41
Notice: before reboot, you need confirm that you have saved all configurations.. 5.3.6. Security 5.3.6.1. Mmi filter mmi filter user could make some device own ip, which is pre-specified, access to the mmi of the gateway to config and manage the gateway. Field name explanation mmi filter ip table li...
Page 42
5.3.6.2. Firewall firewall configuration in this web interface, you can set up firewall to prevent unauthorized internet users from accessing private networks connected to the internet (input rule), or prevent unauthorized private network devices from accessing the internet (output rule). Firewall s...
Page 43
Output rule. Deny/permit specify current adding rule by selecting deny rule or permit rule. Protocol type filter protocol type. You can select tcp, udp, icmp, or ip. Port range set the filter port range src addr set source address. It can be single ip address, network address, complete address 0.0.0...
Page 44
Nat configuration field name explanation ipsec alg it is an encryption technology. Select it to enable ipsec alg, the default is enable ftp alg ftp is a service of connection layer which can transform intranet ip into extranet ip when intranet ip is sending out packet. Select it to enable ftp alg, t...
Page 45
Notice: after finish setting, click the add button to add new mapping table; click the delete button to delete the selected mapping table. 5.3.6.4. Vpn config this web page provides us a safe connect mode by which we can make remote access to enterprise inner network from public network. That is to ...
Page 46
Current state. After you select it, you’d better save configuration and reboot your device. Enable vpn select it or not to enable or disable vpn ； vpn server addr set vpn l2tp server ip address vpn user name set user name access to vpn l2tp server vpn password set password access to vpn l2tp server ...
Page 47
6. Appendix 6.1. Specification 6.1.1. Hardware item vata2020 gateway adapter (input/output) input: 100-240v output: 12v 1a port wan 10/100base- t rj-45 for lan lan 10/100base- t rj-45 for pc operation temperature 0 ～40℃ relative humidity 10～65% main chip ralink mips 24kec (320mhz) sdram 16m flash 4m...
Page 48
Gateway ping test through keyboard commands support dhcp client in the wan port support basic nat and napt support vlan (optional: voice vlan/ data vlan),support ntp support dmz support vpn (l2tp) function wan port supports main dns and secondary dns server can select dynamically to get dns in dhcp ...
Page 49
Shine under "network adapter". If so, remove the device and reinstall. Otherwise, the nic in another slot, if not enough, replace the card. Can not access the internet access modes commonly used example (already installed on your computer dial-up software) description: 1 、make sure the front of the ...