X10 NightWatch 2 SC23A Install Manual
1. Attach the camera to a wall in the location you want to
monitor. Mount it with the cable coming out of the
bottom. If you are installing the camera outdoors, pass
the 60 ft. cable from the camera through a small hole in
your exterior wall.
2. Plug the camera’s plug into the adapter cable.
3. Plug the video plug on the adapter cable into the yellow
Video In socket on your TV/monitor.
4. Plug the audio jack into either audio socket (red or white)
on your TV/monitor.
5. Plug the power supply’s jack into the power socket on
the adapter cable.
6. Plug the power supply into any 120V AC outlet.
X10 Wireless Technology, Inc.
LIMITED 1-YEAR WARRANTY
X10.com, a division of X10 Wireless Technology, Inc.
(X10) warrants X10 products to be free from defective
material and workmanship for a period of one (1) year from
the original date of purchase at retail. X10 agrees to repair
or replace, at it’s sole discretion, a defective X10 product
if returned to X10 within the warranty period and with proof
of purchase.
If service is required under this warranty:
Call 1-800-442-5065, visit www.x10.com, or e-mail
sales@x10.com.
X10.com, a division of
X10 Wireless Technology, Inc.
Visit www.x10.com/support for more help.
●
Extremely small size.
●
Plugs into RCA type inputs on any TV or monitor.
●
Can be turned on and off from X10 controllers.
●
Remote controlled power supply (included).
●
Very sensitive so it can be used in low light conditions.
●
Use it outdoors to monitor your front door, back yard, etc. (60 ft. cable included).
Model SC23A
The SC23A includes a very small and compact B/W video camera (WC12A) that plugs into the RCA audio/video jacks
on any TV or monitor. You can place it anywhere you want to monitor (indoors or outdoors). It also includes a microphone
so you can hear as well as see what’s going on. It is powered from a remote controlled power supply (XM17A) so you can
turn it on and off by remote control using X10 controllers and remotes (sold separately).
NightWatch 2
Indoor/Outdoor Black &White Camera
WC12A
™
(with microphone)
Video/Audio
monitor of
your choice
Video Audio
In In
60 ft.
Set the Housecode dial to
match the setting on the X10
Controller or Remote Control
that you want to control the
camera connected to the
XM17A from.
Set the Unit Code dial to any
unused number between 1
and 16.
Plug video
adapter in
here.
Plug power
supply in here.
Plug camera in here.
Adapter Cable.
Plug audio in here.
SC23A-9/02
Plug into any
AC outlet