› Operating voltage: 230 V~/50 Hz
› Power consumption: 100 W
› Loudspeaker impedance: 6 – 8 ohm
› Input sensitivity/impedance: Line: 250 mV/47 k ohm
› Power output :2 x 50 W at 6 ohms
› Harmonic distortion: < 0,05 %
› Frequency response: 20 – 20.000 Hz
› S/N Ratio: Line: 70 dB (A)
Phono: 60 dB (A)
› Channel separation: 60 dB
› Tone control: Bass +/–10 dB/100 Hz
Treble +/–10 dB/10 kHz
› Dimensions: 420 x 135 x 215 mm
› Weight: 5,55 kg
Cleaning the device
Unplug the power cable before cleaning. Always use a soft, dry, clean and fuzz-free cloth to cle-
an the unit’s exterior. If the device is extremely dirty you can use a soft cloth, dampened with
water or a mild cleaning solution to clean. Never use any abrasive or harsh cleaning agents (e.g.
alcohol, benzine or thinners) as these could damage the controls, casing or any markings and
labels found on the device.
Dispose of unusable equipment in accordance with applicable statutory provisions.
Maintenance, handling and cleaning
Should questions arise then please contact a specialist or our service hotline:
+49 531 224356-82
lived non food GmbH • Theodor-Heuss-Straße 3 • D-38122 Braunschweig/Germany
Address: First Flash GmbH
Donaustraße 20 • D-38120 Braunschweig/Germany
Information and updates: http://www.x4-tech.de
cations and information contained in this manual without
All brands mentioned are property of X4-TECH or of their respective owners.
X4-TECH assumes no responsibility or liability for any errors or inaccuracies that may appear in
this instruction manual.
© 2012 X4-TECH All Rights Reserved.