X4-TECH A-1200 Instruction Manual

Manual is about: X4-TECH Hi-Fi stereo amplifier Instruction manual

Summary of A-1200

  • Page 1

    Available in: black edition › white edition › silver edition instruction manual hi-fi stereo amplifi er amplifi er a-1200 similiar to illustration.

  • Page 2: Table Of Contents

    2 3 table of contents 5 chapter 1 intended use 5 explanation of symbols 6 chapter 2 safety information 9 before use 10 chapter 3 the device 10 features 10 the a-1200 12 description of remote controls 17 inserting batteries into the remote controls/battery information 19 chapter 4 setup 20 chapter 5 ...

  • Page 3: Intended Use

    4 5 dear customer: thank you for deciding on purchasing this quality product from x4-tech. This instruction manual will give you a general idea of how this device operates, as well as pro- vide you with information on cleaning and safety procedures. Please take a few minutes to read and follow all s...

  • Page 4: Safety Information

    6 7 chapter 2 safety information chapter 2 safety information dear customer: the following safety and hazard warnings are not only for the protection of your device, but also serve as a protection against potential health hazards. Please take time to read the following instructions carefully. We ass...

  • Page 5

    8 9 › never touch the power plug with damp or wet hands. There is the risk of electric shock! › make sure the device is properly ventilated during operation and never operate it in constricted areas, such as for example in a bookcase or shelf. Never block ventilation openings with papers, magazines,...

  • Page 6: The Device

    10 11 9. Dab: selects the dab input as source 10. Function button (sound selection) 11. Control dial for volume or sound settings (function mode) 12. Power button on/off 1. Power inlet 2. Warning symbol 3. Loudspeaker outputs 4. Line-out output 5. Dab stereo source input jack 6. Tuner stereo source ...

  • Page 7

    12 13 description of remote controls the included system remote control lets you comfortably control all of the main functions on your device. If you have only purchased this model, please note that some of the functions on the remote control will not be available for use. Please have a look at the ...

  • Page 8

    14 15 chapter 3 the device chapter 3 the device 22. Source selection tape/aux, dab, phono, tuner, line in (select to play sources connected to the front input), dvd/cd 23. Treble +/– regulates treble settings 24. Bass +/– regulates bass settings 25. Vol +/– regulates the volume this remote control r...

  • Page 9

    16 17 chapter 3 the device chapter 3 the device 18. St/mo switches between a two-channel stereo and one-channel mono operation mode 19. / play/pause starts/pauses playback 20. Navigation buttons  move to the right, selects the next menu in a menu mode move to the left, selects the previous menu...

  • Page 10: Setup

    18 19 chapter 3 the device chapter 4 setup › the device should be set up on a stable and level surface. Make sure that proper ventilation is provided to ensure adequate air circulation and that a minimum distance of 10 cm is maintained above and behind the device. If you would like to place further ...

  • Page 11: Connections

    20 21 connecting the device to a power supply ensure that the power cable is unplugged before connecting further components. Components already connected to the device should also be unplugged from the po- wer supply. › make sure connections have been made accurately and not reversed, this means for...

  • Page 12: General Operation

    22 23 turning on and playing an audio source check that all connections are secure and proper, before turning the device on for the fi rst time. › the main switch should be switched on fi rst (position – on), before putting the device into operation. › the current selected input source will appear o...

  • Page 13: Troubleshooting

    24 25 chapter 7 troubleshooting chapter 7 troubleshooting the device you have just purchased is equipped with state-of-the-art technology and is safe to operate. Nevertheless, problems or malfunctions may occur. Before contacting a service technician, refer to the following possible solutions: disto...

  • Page 14: Maintenance And

    26 27 carry out a technical safety inspection on a regular basis, e.G. Check if the power cable or housing may have become damaged. If there is reason to believe that the device can no longer be operated safely, then disconnect it immediately from the power supply and secure it against any unintenti...

  • Page 15: Specifi Cations

    28 29 chapter 9 specifi cations technical data inputs › 5 x stereo in jacks (47 kohms; 390 mv) › 1 x phono in jacks (47 kohms; 5 mv) sound settings › treble +/–14 db at 10 khz › bass +/–14 db at 100 hz power output › 2 x 50 watts rms at 4 ohms › 2 x 40 watts rms at 8 ohms › sn/ratio: > 80 db › disto...

  • Page 16

    Version 1.2 – 6/2010 www.X4-tech.De.