B r a n d model hpx60 series automatic battery charger user’s manual rev. 1.0 october 17, 2006 for sales, support and service phone: 407-331-4793 fax: 407-331-4708 website: www.Xenotronix.Com email: information@xenotronix.Com xenotronix/tli, inc. 2541 tracy road toledo, ohio 43619 phone: 419-666-698...
Warranty seller warrants that its products ("product(s)") will meet the specifications set forth in its catalog from time to time, unless the buyer is notified otherwise prior to delivery. Seller will, without charge, repair or provide a replacement for any of the products which prove to be defectiv...
Table of contents model hpx60 automatic battery charger – user’s manual important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 operating...
Hpx60 user’s manual xenotronix/tli 1 important safety instructions save these instructions - this manual contains important safety and operating instructions for model hpx60 battery chargers. Before using the battery charger, please read all instructions and cautionary markings on the battery charge...
Hpx60 user’s manual xenotronix/tli 2 introduction this unit is a two stage, constant voltage battery charger with current limiting, current fold back, and automatic temperature compensation of the output voltage. It is protected against shorting the output terminals and reversing the output terminal...
Hpx60 user’s manual xenotronix/tli 3 the input voltage setting is displayed on the selection switch on the back of the unit. If this setting must be changed, make sure the power cord is disconnected while operating the switch. Operating the switch while power is applied may cause damage to the switc...
Hpx60 user’s manual xenotronix/tli 4 capacity). Leave the battery connected to the charger for 16-24 hours to finish charging in the float charge mode, or have a unit made with a custom switch current to match the battery capacity. Xenotronix/tli can make custom units, or modify our existing units, ...
Hpx60 user’s manual xenotronix/tli 5 maintenance instructions fuse replacement - the ac input module contains the main fuse and a spare fuse. Detach the power cord. Use a flat head screwdriver or a coin to pry open the fuse drawer or holder. Replace the blown fuse with the spare. You can use the old...
Hpx60 user’s manual xenotronix/tli 6 battery recommendations lead-acid batteries charged @ c/10 rate. Smaller capacity batteries may require a smaller charge current to be safely charged. Consult the battery manufacturer or xenotronix/tli. Model battery hpx60-12c400 12 v, 40 ah hpx60-24c200 24 v, 20...
Hpx60 user’s manual xenotronix/tli 7 model hpx60 series automatic parallel battery charger supplemental instructions important precautions follow the battery manufacturer’s recommendations when selecting a battery for use with this unit. The battery should be able to accept the full rated output cur...
Hpx60 user’s manual xenotronix/tli 8 less, of its maximum rated current. In the constant voltage mode the unit is regulating voltage and the battery is being properly charged. When the indicator first changes from yellow to green the battery should be more than 80% charged, depending on battery size...
