Xerox 4595 Manual For Operators
Title
Find the MAC address
Date
May 2007
Product
Xerox 4110 / 4590 Copier Printer
“How Do I?” guide for Operators
Page 1 of 1
Covered:
•
How to find MAC address of 4110/4590 built-in Controller
•
How to find MAC address of 4110/4590 Fiery Controller
•
How to find MAC address of 4110/4590 DocuSP Controller
How to find MAC address of 4110/4590 built-in Controller
To find the Media Access Control (MAC) address of the 4110/4590 do the following:
1. Print the Configuration Sheet / System Setting List
a. Press the [
Machine Status
] button on the Control Panel. The Machine Status screen will be displayed on
the Touch Screen.
b. Select the [
Billing Meter / Print Report
] tab.
c. Select the [
Print Report / List
] button.
d. Select the [
Print Mode Settings
] button.
e. Select the [
Setting List - Common Items
] button.
f.
Press the [
Start
] button on the Control Panel to print the list.
2. After printing the system settings sheet find the header Communication Settings (most likely on page 3 of the
Systems Settings list), the MAC address will be under Ethernet Settings.
NOTE
: In this instance, MAC refers to Media Access Control, not the Macintosh.
How to find MAC address of 4110/4590 Fiery Controller
To find the MAC Address on the Fiery DFE Controller:
1. Select
[
START
]
2. Select
[
Run
]
3. Type – cmd and then select [
OK
]
4. In the CMD Window type – ipconfig /all – then press ‘enter’
5. Read the MAC Address as the ‘physical address’ that is just above the customer’s ip address.
How to find MAC address of 4110EPS/4590EPS/4595 DocuSP Controller
To find the MAC Address on the DocuSP DFE do the following:
1. Log on as Administrator User
2. Select
[
Setup
] – Pulldown from top middle of screen.
3. Select
[
Network Configuration
]
4. Select the [
Connections
] Tab at top of screen
5. The MAC Address is displayed