Xpand light 3d glasses (rf) model no. X105-rf-x1 (3d glasses) and ad025-rf-x1 (rf-emitter) user guide manual-x105-rf-x1-xpand.Indd 1 28.9.2012 9:51:21.
Manual-x105-rf-x1-xpand.Indd 2 28.9.2012 9:51:21.
© xpand, all rights reserved. 1 www.Xpand.Me glasses overview (1) button (on, off, pairing) – located at the inner side of right earpiece. (2) led – located at the outer side of right earpiece, near earpiece hinge. Turning on your glasses » shortly press button once. » red led will ramp from off to ...
© xpand, all rights reserved. 2 www.Xpand.Me connecting glasses to 3d rf host once glasses are associated with host, they will automatically connect to that host every time they are switched on. If during the operation glasses lost the connection to host, they will automatically try to reconnect to ...
© xpand, all rights reserved. 3 www.Xpand.Me charging the battery to charge the glasses, plug the micro usb cable in computer or other usb device capable of supplying power. Led will remain lit while glasses are charging. When battery is fully charged led will go off. Technical specifi cations 3d te...
© xpand, all rights reserved. 4 www.Xpand.Me using with 3d tvs 1. Connect the emitter connector to the corresponding vesa stereo connector in the tv or projector. 2. Once the emitter is connected to the tv/projector, please make sure that the tv/ projector is in 3d mode. Check the x sign on the emit...
© xpand, all rights reserved. 5 www.Xpand.Me battery the 3d glasses battery is not user replaceable. Warning, battery may explode if mistreated. Do not disassemble, or dispose of in fire. Viewers need to refer to the recommendations described below. » stop watching moving images, if you have any sym...
Technical support for direct support with xpand consumer products please contact us at: (+1) 888.906.1190 or technicalsupport@xpand.Me manual-x105-rf-x1-xpand.Indd 6 28.9.2012 9:51:25.
