Yamaha DDKU-L7 Owner's Manual

Keyboard Stand DDKU-L7 Owner's Manual

Keyboard Stand Assembly

Please con

fi

rm that all parts shown in the 

illustration are provided.

Unfold the folded keyboard stand.

Unfold the keyboard stand as shown

Straighten the frame.

3-1

Fix the joints so that the frame is unfolded and 

straightened properly.

3-2

Loosen the fixation bolts and slide them into position, 

then tighten the screws with your hand.

Precautions

Be sure to install the Keyboard Stand with two or more 

people.

Take care not to drop the Keyboard or to pinch your 

fi

nger(s).

Assembly should be carried out by at least two persons.

Always place the stand on a 

fl

at, stable surface. Placing 

the stand on uneven surfaces may result in it becoming 

unstable or overturn, causing the keyboard to drop and 

possibly resulting in injury.

Do not use the stand for anything other than its 

designed purpose. The stand is not designed to hold 

anything other than the speci

fi

ed keyboard. Placing any 

object other than the speci

fi

ed keyboard on the stand 

may result in the object dropping or the stand 

overturning.

Do not apply excessive force to the keyboard as it may 

cause the stand to overturn or the keyboard to drop.

Make sure the stand is sturdy and safe, and all screws 

are tight and 

fi

rm before use. If not, the stand may 

overturn, the keyboard may drop, or may result in injury 

to the user.

1

Keyboard stand

Braces

2

1

2

3

3

1

2

3

Install the braces with your hand. 

Stretch out the frames and install the braces using the bolts as 

shown.

n

When removing the braces at disassembly, the screws of 

the braces may hard to loosen.  In this case, loosen the 

screws while moving the braces lightly to the front, back, 

left and right.

Raise the assembled stand as shown, then 

con

fi

rm that all screws shown in the illustration 

are tight and 

fi

rm. 

Mount the keyboard. 

Hold the keyboard horizontally (with two people), and place 

it on the keyboard stand, aligning the rear panel with the 

stoppers on the keyboard stand. Make sure that the 

protrusion on the bottom of the keyboard fits inside of the 

stand frames.

Be careful not to drop the keyboard or to get your 

fi

ngers caught between the keyboard and the stand 

parts.

Do not hold the keys. since this may damage or 

result in a malfunction.

To uninstall the Keyboard Stand, reverse the procedure in Step #4 

above.

Post-assembly checklist

Once you’ve assembled the stand, check the following points:

• Are there any parts left over?

If so, read the assembly instructions again and correct any 

mistakes you might have made.

• Is the instrument clear of doors and other movable 

fi

xtures?

If not, move the instrument to an appropriate location.

• Does the instrument make a rattling noise when you 

play it or move it?

If so, properly tighten all screws.

Also, if the keyboard makes a creaking noise or seems unsteady 

when you play it, refer carefully to the assembly instructions and 

diagrams and retighten all screws.

Speci

fi

cations

4

5

6

Dimensions 

(WxDxH), 

Weight

1185 x 652 x 750mm, 6kg

U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation

© 2006 Yamaha Corporation

WH88580   ???MWCP?.?-01A0

Printed in Japan

JA

EN