Yamaha DDKU-P7 Owner's Manual

Download

Print this page

Bookmark us

Pedal Unit DDKU-P7 Owner's Manual

Installing the Pedalboard

Have a Phillips-head (+) screwdriver ready.

Please confirm that all parts shown in the illustration are provided.

Install the expression pedal.

2-1

Remove the tape from the connector in the hole of the pedal unit.

2-2

Remove the screw.

Be careful not to drop any screws inside the pedal umit during installation. Do not

discard the screw; you will need it later in step 3.

2-3

Hold the cable connector so that the two lines on the connector are

facing upward, then carefully plug it into the inside connector on the

bottom of the expression pedal.

2-4

Install the expression pedal to the corresponding indentation on the

pedal unit by first fitting the protrusion on the back side and then fitting

the front side as shown.

As you fit it in position, the front side of the expression pedal is slightly lifted. When

installing the expression pedal, be careful to avoid catching the connector.

Fix the expression pedal to the pedal unit while holding the

expression pedal, using the screw you removed in step 2-2.

Install the 2nd expression pedal.

4-1

Remove the tape from the connector in the hole of the pedal unit.

4-2

Remove the screw.

Be careful not to drop any screws inside the pedal unit during installation. Do not

discard the screw; you will need it later in step 5.

Precautions

Before installing/uninstalling, turn the power of the

Instrument off.

Take care not to drop the pedalboard or to pinch your

finger(s).

Do not remove the expression pedal and the 2nd

expression pedal once they have been installed, since

this may cause a faulty contact and result in a

malfunction.

Pedal Unit

2nd Expression Pedal

Cord

Install the expression

pedal

Install the 2nd expression

pedal

Expression Pedal

4-3

Hold the cable connector so that the two lines on the connector are

facing upward, then carefully plug it into the inside connector on

the bottom of the second expression pedal.

4-4

Install the 2nd expression pedal to the corresponding indentation

on the pedal unit by first fitting the protrusion on the back side and

then fitting the front side as shown.

As you fit it in position, the front side of the 2nd expression pedal is slightly lifted. When

installing the 2nd expression pedal, be careful to avoid catching the connector.

Fix the 2nd expression pedal to the pedal unit while holding the

2nd expression pedal, using the screw you removed in step 4-2.

Connect the TO MAIN terminal of the Pedalboard to the TO PEDAL

terminal of the instrument using the cord.

• Convenient carrying handle

You can transport this pedal unit holding the carrying handle on the rear.

Do not hold the keys, since this may damage or result in a

malfunction.

• For users of the optional DDKU-L7

You can attach this pedal unit to the optional DDKU-L7 keyboard stand.

Fit the indented parts on the rear of the pedal unit onto the corresponding protrusions of the

DDKU-L7 keyboard stand.

To uninstall the pedalboard, reverse the procedure.

Post-assembly checklist

Once you’ve assembled the stand, check the following points:

• Does the pedalboard produce sounds?

• Confirm that the Pedalboard cord plugs are securely connected to each

terminal on the Main unit and pedalboard.

Specifications

Pedalboard

20 Keys (C - G), Initial Touch

Controls

Footswiches (Left, Right), Expression pedal

Dimensions

(WxDxH), Weight

873 x 539 x 310mm (with the expression pedal installed), 13kg

Connector

TO MAIN

U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation

WH76610 ???MWDH?.?-01A0

Printed in Japan