Yamaha LLX6 Owner's Manual
BATTERY REPLACEMENT
The output jack is an EIAJ-standard 1/4" phone jack. Be sure to use an
appropriate connection cable.
The built-in preamplifier is automatically switched on when a plug is
inserted into the output jack. When not using the instrument, or when
playing it without amplification, be sure to remove the plug from the
output jack to preserve battery life.
Before connecting or disconnecting the instrument, always make sure
that the speaker’s (amplifier) volume control is set to “0”.
Be sure to remove the battery if the instrument will not be used for an
extended period of time in order to prevent possible damage due to
battery leakage.
PRECAUTIONS
ELECTRIC
ACOUSTIC GUITAR
Owner’s Manual
Thank you for choosing a Yamaha electric-acoustic guitar.
In order to make the most of the advanced features and
performance provided by your guitar, please read this
manual carefully before using the instrument.
SPECIFICATIONS
System
SYSTEM-54 (Monaural 1 way)
Pickup
Bar Sensor (Piezo type)
Output jack
Combination end pin/power switch
Output impedance
10 k
Ω
Power supply
9V DC, 6LR61 dry cell battery
Battery life
Approx. 1,000 hours
Accessories
• Hexagonal wrench for neck adjustment x1
• 6LR61 dry cell battery x1
NOMENCLATURE
Battery
Pre-amplifier
Output Jack
(with power switch function)
Pickup
Bar Sensor
When battery power becomes low the guitar’s sound will become distorted or
the volume level will decrease, etc. When these symptoms appear, replace
the battery as shown in the illustration below.
* Make sure that the battery’s +/- poles are properly aligned. Improper
alignment can result in fire.
* Be sure to remove the battery if the instrument will not be used for an extended
period of time in order to prevent possible damage due to battery leakage.
1 Leaving the 6th string in place, remove the 1st through 5th strings.
* Avoid removing all 6 strings at once. If a repair necessitates the removal of
all six strings, please be careful not to dislodge the bridge saddle, as this can
damage the bar sensor’s balance, resulting in reduced sound output.
SERVICE
If your guitar should need any parts or service, or if you need any information, including the address of your nearest YAMAHA dealer, contact:
YAMAHA CORPORATION OF AMERICA
Guitar Service Department
6600 Orangethorpe Avenue
Buena Park, Calif. 90620 Calif. U.S.A.
TEL: 714 522 9433
YAMAHA EUROPA G.M.B.H.
2084 Rellingen, b. Hamburg
Siemensstr. 22/34 Germany
TEL: 04101 30 30
YAMAHA-KEMBLE MUSIC (U.K.) LTD.
Sherbourne Drive, Tilbrook,
Milton Keynes MK7 8BL, England
TEL: 0908-366 700
YAMAHA MUSIQUE FRANCE S.A.
Parc D’activités De Paris Est
Rue Ambroise Croizat
77183 Croissy Beaubourg France
TEL: 64 61 4000
YAMAHA CANADA MUSIC LTD.
135 Milner Avenue Scarborough
Ontario MIS 3R1 Canada
TEL: 416 298 1311
YAMAHA DE MEXICO S.A. DE C.V.
Apdo. Postal No.28-207
Mexico 1, D.F., Mexico
TEL: 686 0033
YAMAHA MUSIC LATIN AMERICA CORP.
6303 Blue Lagoon Drive, Suite 330
Miami Florida 33126 U.S.A.
TEL: 305 264 2581
YAMAHA SCANDINAVIA A.B.
Box 300 53 400 43 Göteborg, Sweden
TEL: 031 496090
YAMAHA-HAZEN ELECTRONICA MUSICAL S.A.
Jorge Juan 30, 28001 Madrid Spain
TEL: 593 2554
YAMAHA MUSICA ITALIA S.P.A.
Viale Italia 88, 20020 Lainate (Milano)
Italia
TEL: 2 93577 1
YAMAHA MUSIC AUSTRALIA PTY., LTD.
17-33 Market Street
South Melbourne, Vic. 3205 Australia
TEL: 699 2388
0306 Printed in Japan
QC76350 R2
USING THE GUITAR
1 Using a cable with a standard phone plug, connect the guitar’s end pin output
jack to the input jack on a guitar amplifier, powered speaker, or similar device.
* Before making any connections or disconnections, always make sure that
the volume is turned all the way down or the power is switched “OFF” on
the guitar amplifier or powered speaker, etc.
* Power is drawn from the battery when the cable is connected to the output
jack, so make sure you unplug the cable when the guitar is not in use.
2 Adjust the volume and tone using the controls on the guitar amplifier or
powered speaker.
2 Place your hand into the sound hole
and as shown in the illustration, use
your finger to lift the battery out from
its holder, disconnect the battery
snap, and remove the battery.
3 Connect a new battery (6LR61) to
the battery snap and set the battery
in the battery holder.
* To keep the battery cord from being
seen through the sound hole, insert
the battery so the cord is facing the
same direction as shown in the
illustration on the right.
Saddle
6LR61 battery
Battery snap