1. DL manuals
  2. Z-BEAST
  3. Lawn Mower
  4. 48ZB
  5. Owner's Manual

Z-BEAST 48ZB Owner's Manual

Manual is about: FINISH MOWER

Summary of 48ZB

  • Page 1

    Owner’s manual this manual contains important safety instructions for the gasoline engine powered lawnmower models: 48zb read safety warnings and operating instructions carefully. Save this manual. When you call the help-line you will need to have the following information: date of purchase: _______...

  • Page 2

    Rev: mar2011 z- beast finish mower 48zb z- beast copyright© 2010 by gxi outdoor power, llc. All rights reserved. No part of this publication can be reproduced or distributed without prior written permission of gxi outdoor power, llc clayton, nc 27520 usa. Dek is a registered trademark of gxi outdoor...

  • Page 3

    Check out our other great products at www.Homedepot.Com or visit our web site at www.Beastpowerequipment.Com turf beast 36-inch & 54-inch walk behind mower beast series brush master chipper/shredder with 2-way feed 100-inch tow behind mower the beast 36-inch brush mower brush beast 36-inch & 45-inch...

  • Page 4: Contents

    Rev: mar2011 z- beast finish mower 48zb z- beast contents safety information and warnings ......................................................................... 1 preparation safety precautions ............................................................................ 2 operation safety precaut...

  • Page 5

    1 48zb z- beast z - beast finish mower rev: march 2011 safety information z-beast lawn mowers are designed to give safe and dependable service if operated according to instructions. Read and understand this owner’s manual before operating your lawn mower. Emission control system information the u.S....

  • Page 6

    2 48zb z- beast z - beast finish mower rev: march 2011 preparation safety precautions preparation—safety precautions 1. Evaluate the terrain to determine what accessories and attachments are needed to properly and safely perform the job. Only use accessories and attachments approved by beast. 2. Ins...

  • Page 7

    3 48zb z- beast z - beast finish mower rev: march 2011 operation safety precautions equipment operation—safety precautions 1. Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect. Carbon monoxide is odorless, tasteless, and can be fatal. 2. Mow only in dayl...

  • Page 8: Need Help?

    4 48zb z- beast z - beast finish mower rev: march 2011 before attempting to use your mower, make sure you are familiar with all of the components and have read the manual. Need help? Parts, service and technical assistance call: 1-919-550-3221 www.Beastpowerequipment.Com danger: do not bypass, modif...

  • Page 9

    5 48zb z- beast z - beast finish mower rev: march 2011 safety decals safety decal identification the labels shown below are located on your mower to warn you of potential hazards and provide you with important safety information. If these decals become difficult to read or are missing from the mower...

  • Page 10

    6 48zb z- beast z - beast finish mower rev: march 2011 product specifications models feature 62z product type residential, 0-turn cutting width 48-inch engine see engine manufacturer’s manual engine start electric transmission type dual hydrostatic transmission mfg peerless mower speeds infinitely v...

  • Page 11

    7 48zb z- beast z - beast finish mower rev: march 2011 control panel and lawn mower components throughout this manual, instructions are given on the operation of your z-beast mower. We recommend that while going through this manual, you have your mower available for quick and easy access in order to...

  • Page 12: Missing Parts Request Form

    8 48zb z- beast z - beast finish mower rev: march 2011 missing parts request form name phone email address important: please include your receipt. Without a receipt, your order will be delayed. You may also email us at: customerservice@gxioutdoorpower.Com fax: 1-919-550-3277 if emailing, please scan...

  • Page 13

    9 48zb z- beast z - beast finish mower rev: march 2011 operating instructions starting the engine danger: exhaust contains poisonous carbon monoxide, a colorless and odorless gas. Breathing exhaust can cause loss of consciousness and may lead to death. Do not operate the engine in a confined space w...

  • Page 14

    10 48zb z- beast z - beast finish mower rev: march 2011 operating instructions operating the mower 1. Make sure the brake has been moved to the off position. 2. Pull both control handles to the center. 3. To drive the mower forward, push both handle bars forward away from the chest. The forward spee...

  • Page 15

    11 48zb z- beast z - beast finish mower rev: march 2011 operating instructions changing the height of cut your mower is equipped with an easily adjustable floating deck, which can be adjusted for cut heights of 1½ inches to 5 inches in ½-inch increments. The deck height adjuster is located on the ri...

  • Page 16

    12 48zb z- beast z - beast finish mower rev: march 2011 operating instructions return to neutral danger! Make certain the engine comes to a complete stop before putting you hands in the access panel. If the mower creeps or will not stop as desired when the handles are in neutral position, adjustment...

  • Page 17

    13 48zb z- beast z - beast finish mower rev: march 2011 general maintenance the importance of maintenance regular maintenance is essential to ensure your mower continues to deliver safe and high-quality performance. To help you properly care for your mower, the following pages include a recommended ...

  • Page 18

    14 48zb z- beast z - beast finish mower rev: march 2011 item procedure time interval break-in (first 5 hrs) every 8 hrs (daily) every 40 hrs (weekly) every 100 hrs (bi-weekly) every 200 hrs (monthly) belts inspect (adjust if needed) x x blades inspect and/or sharpen x engine air filter inspect (see ...

  • Page 19

    15 48zb z- beast z - beast finish mower rev: march 2011 service adjustments danger: before making any adjustments or servicing your mower, make sure the mower is on level ground, the blades are disengaged, the brake set, the key is removed, the engine is off and the spark plug wires are disconnected...

  • Page 20

    16 48zb z- beast z - beast finish mower rev: march 2011 spindle brake inspection and replacement blade and pulley brake inspections should be performed every 50 blade on and off cycles. Before beginning service, park the z-beast on a level surface, turn the blades off, turn the engine off, set the b...

  • Page 21

    17 48zb z- beast z - beast finish mower rev: march 2011 service adjustments engine-to-hydrostatic drives belt adjustment 1. The engine-to-hydrostatic drives belt is located underneath the rear deck. The belt should move approximately 1/8 to 3/16-inch with three (3) to five (5) pounds of pressure app...

  • Page 22

    18 48zb z- beast z - beast finish mower rev: march 2011 service adjustments safety system adjustments warning: do not bypass, modify, alter, or disconnect the safety system. Make sure that the safety interlock system is fully operational each time before mowing. Failure to do so could present danger...

  • Page 23

    19 48zb z- beast z - beast finish mower rev: march 2011 lubrication points to ensure proper lubrication of moving parts, gxi recommends that you lubricate the following components with a high- quality, ep2 high-temperature-based grease or equivalent. Should the conditions of operation be more severe...

  • Page 24

    20 48zb z- beast z - beast finish mower rev: march 2011 storage instructions short term storage let engine cool before storing and do not store near flame, high heat, and possible ignitions from sparks. Always clean off all flammable material as well as grime and dirt before storage. Never use a pre...

  • Page 25

    21 48zb z- beast z - beast finish mower rev: march 2011 troubleshooting problem possible causes solution engine will not start 1. Key in the off position 2. Insufficient fuel in the tank 3. Air bubble in the fuel line 4. Fuel valve in off position 5. Choke not on 6. Choke linkage out of adjustment 7...

  • Page 26

    22 48zb z- beast z - beast finish mower rev: march 2011 troubleshooting problem possible causes solution mower will not move forward or reverse 1. Brake on 2. Bypass levers pulled out 1. Release brake on control panel 2. Ensure bypass pins are retracted cannot move mower when the engine is off 1. By...

  • Page 27

    23 48zb z- beast z - beast finish mower rev: march 2011 limited warranty & service length of warranty: *(from the date of original retail purchase) noncommercial/ nonrental commercial rental engine manufacturer’s warranty manufacturer’s warranty manufacturer’s warranty transmission manufacturer’s wa...