Z-CAM K1 Pro User Manual - page 16
9.
CAMERA MAINTENANCE
•
As the camera is a precise instrument, please do not flop it or let it suffer physical
strike.
•
As the camera is a non-waterproof of camera, please do not use it in water or a humid
environment.
•
If water accidently invades the camera, please shut it down, take out the battery and
the memory card, and make the camera dry within 24 hours.
•
As the camera’s heating range is 0-40°C, please do not place or use the camera in an
environment where the temperature is lower than 0°C or higher than 40°C.
•
Please do not let the camera and the already installed lens face the sun.
•
Please do not touch the image sensor while removing the lens.
•
Please do not blow off any dust on the sensor with a dust blower.
•
Please do not use any detergent containing organic solvent to clean the camera body
and the lens.
•
Please use soft lens cloth to clean the camera body and the lens regularly.
•
Please do not disassemble the camera by yourself.
•
Please take out the battery and place the camera in a well-ventilated, dry and cool
place if the camera will not be used for a long time.
•
Please press the shutter for several times during the storage period to verify whether
the camera can function properly or not.
•
Please do not place the camera in a darkroom, a lab or other places where corrosive
chemicals are stored.
* Please note this document will be updated irregularly and make sure you have downloaded the latest version from the
website:
http://www.z-cam.com/180-vr-camera-k1-pro/
Disclaimer: All product features and technical specifications stated above are subjected to Z CAM™ ‘s sole
interpretation and explanation.