Z-CAM K1 Pro User Manual - page 4
* Please note that with LEMO power cable you can also connect to a battery or external power supply with D-TAP
socket, and hot swap is supported.
4) To power off the camera, long-press the Power button until the LED indicators are off.
2.3. Camera with PoE (Power over Ethernet)
To use PoE as power supply for the camera, you would need a router or switch* with PoE
function, with output power not less than 15.4W for each port, and the output voltage should be
48V for each port.
* Please note that a switch with PoE can only used for power supply, and you would need a
router with PoE if need control and live viewing with the camera.
2.4. Ethernet Connection (to Computer)
With Ethernet connection to a computer (PC/Mac), you can control the camera and download
files with Z CAM™ Controller (4. CAMERA CONTROL), and do live streaming with Z CAM™
WonderLive (8. LIVE STEAMING, PC only).