FOCUS ASSIST (Peaking)
EXPOSURE ASSIST (Zebra)
PIXEL TO PIXEL (Zoom)
Pixel-to-Pixel not available in 480p!
Zebra 2 must be higher than Zebra 1!
ZEBRA DETECT 1
ZEBRA DETECT 2
Frame 6 has not been stored!
No input signal!
inder EVF User M
You have attempted to use the
PIXEL-TO-PIXEL (zoom) feature
while in 480p standby or record
If possible set the output of your
camera to a higher format than
480p to be able to use the PIXEL-
TO-PIXEL zoom feature
You have attempted to set the
Zebra 2 value below the Zebra 1
Set Zebra 1 lower than Zebra 2 or
increase the level of Zebra 2 so
that it is higher than Zebra 1
You have attempted to show a
stored frame that doesn’t exist in
the EVF’s memory
Use the capture option to save a
frame of video into the selected
The EVF is unable to detect a
signal from an input device through
the HMDI cable
Make sure the HDMI cable is se-
curely plugged into your camera
and your camera is in video mode