ZAGATO Volumetrica Series Instruction Manual

Summary of Volumetrica Series

  • Page 1

    We congratulate you for having bought this top-quality coffee machine and thank you for choosing zagato. Before operating the coffee machine , we recommend to read the following instructions thoroughly which explains how to install and use the unit. Instruction manual zagato macchina da caffe’ espre...

  • Page 2

    General instructions this espresso coffee machine is intended for professional use. It is designed to prepare hot drinks such as tea, cappuccino, coffee (at various strengths and volumes) and espresso. Additional accessories are available which have been designed for optimum use of the machine. If t...

  • Page 3

    Safety indications general safety instructions do not touch the machine with wet hands and feet! Do not use the machine barefooted! Do not use cable extensions in wet areas! Do not switch off from the mains! Before the specialized personnel carries out maintenance operations deactivate the appliance...

  • Page 4

    Machine description 7 hot water dispensing 8 steam knob 9 machine main switch 10 internal programming switch 11 hot water knob 12 push button panels 1 boiler level-check window 2 boiler pressure gauge 3 pump gauge 4 steam nozzle 5 2-cup filter 6 adjustable feet 1 0 1.5 2.5 1 0 1.5 2.5 1 2 3 7 4 4 5 ...

  • Page 5

    Technical data model zagato 1gr volumetrica zagato 2gr volumetrica zagato 3gr volumetrica power 11amp: 240v 50/60hz ; 2400w 17amp:240v 50/60hz 3900w 25amp:240v 50/60hz 6000w water pres min./max . 2 bar/4 bar width x height x depth 500x620x 520 700x620x520 950x620x520 boiler capacity litre 6 l 12 l 1...

  • Page 6

    Installation preparation of the machine the preparation of the coffee machine and its installation must be performed by qualified staff. Starting the machine open the water tap of the water mains and of the softener / water filter. Turn the switch to position “ 1 ” (electrical power supplied to the ...

  • Page 7

    Calibration pressure switch adjustment the pressure switch shown in the figure acts to keep the boiler pressure constant by engaging or de-activating the electrical heating resistance. This pressure switch is already calibrated to 1.1-1.3 bar during the initial machine testing stage, but should a di...

  • Page 8

    Use and programming coffee pouring on pressing the corresponding button t1-t2-t3 or t4, the corresponding delivery solenoid valves are activated for the time necessary to obtain the required amount of product as previously programmed (volumetric check). The delivery in progress may be suspended befo...

  • Page 9

    Use and programming coffee measure programming place the programming switch in the on position. It is located inside the coffee machine on the left-hand side panel of the body. To access the inside of the machine remove the top tray cup warmer. The buttons t1-t2-t3-t4 will light up. The button t5 wi...

  • Page 10

    Use and programming once completing the programming, place the programming switch back in the off position. Repeat the following operation for the programming of the remaining buttons : for programming with pre infusion repeat steps 3 to 6 for programming with no pre infusion repeat steps 7- 8 and 5...

  • Page 11

    Use and programming 0 1 2 dispensing hot water to dispense hot water , turn the tap knob (w) counter -clockwise : the amount of water which comes out of the nozzle will be proportional to te opening of the tap. Dispensing steam to dispense steam , turn the tap knob (s) counter -clockwise : the amoun...

  • Page 12

    Cleaning and maintenance important for the perfect cleaning and efficiency of the appliance, several simple cleaning operations are necessary on the functional parts and accessories as well as the body panels. The indications given here are applicable for normal use of the coffee machine. If the mac...

  • Page 13

    Cleaning and maintenance group heads (back flushing) the cleaning of the internal parts of the delivery groups is to be performed weekly in the following manner: insert the rubber blind filters ( a ) in the filter-holders pour a teaspoon of a suitable detergent powder on each of the blind filters an...

  • Page 14

    Trouble shooting defect no power to machine no water in boiler no water from group head no steam from the nozzle too much water in the boiler machine leaking delivery of coffee is too fast delivery of coffee is too slow coffee grounds are wet grounds in cup 1 the coffee is too coarse 2 not enough co...

  • Page 15

    Trouble shooting defect coffee delivered cold coffee delivered too hot all buttons lit the pump leaks water the pump functions below the nominal capacity the pump is noisy 1 incorrect pressure switch calibration 1 pump malfunction 1 pump malfunction 1 pump malfunction 1 safety device activated 2 no ...

  • Page 16

    Imported by espresso italia pty ltd 67/69 scarborough beach rd north perth 6006 wa freecall 1300660 976 about the manual the manufacturer reserves the right to add additional details to the product. We guarantee that these instructions reflect the actual state of the product at the moment of its sal...