1. DL manuals
  2. Zaxcom
  3. Receiver
  4. QRX212
  5. User Manual

Zaxcom QRX212 User Manual

Other manuals for QRX212: User Manual

Summary of QRX212

  • Page 1

    1 user manual published january 2016 software version 1.02 zaxcom rx12 / qrx212 module streamlined reception interstage phistersvej 31, 2900 hellerup, danmark telefon 3946 0000, fax 3946 0040 www.Interstage.Dk - pro audio with a smile.

  • Page 2

    2 know your rx12 ........................................................................................................................................ 4 f ront p anel .....................................................................................................................................

  • Page 3

    3 rx12 connector assignments ................................................................................................................ 15 s ingle a nalog c hannel out of one ta5 ................................................................................................................. 1...

  • Page 4

    Zaxcom rx12 front 4 know your rx12 front panel 1. Uhf antenna a 2. Numeric keypad 3. Back key 4. Daylight readable color lcd screen 5. Uhf antenna b 6. Enter key 7. Menu encoder knob - press the menu knob to access the rx12 menu. Rotate and press to adjust the menu perimeters. Navigation shortcut fr...

  • Page 5

    Zaxcom rx12 right side 5 right side 1 2 3 4 5 6 7 1. Uhf antenna b rf loop through rf out - the rf out is after the 35mhz filter and has 3db of gain. 2. External power connector (hirose-4f) voltage range 10 to 18 vdc 3. Audio outputs for modules 1 - 6 (ta-5m) each output can be configured to output ...

  • Page 6

    Zaxcom rx12 left side / rear 6 left side 1 2 3 4 5 1. Qrx212 module position 2 2. Qrx212 module position 1 3. Uhf antenna b loop through rf out – the rf out is after the 35mhz filter and has 3db of gain. 4. Qrx212 module position 3 5. Qrx212 module position 4 rear 1 1. Vent fan.

  • Page 7

    Zaxcom rx12 inserting the qrx212 modules 7 inserting the qrx212 modules rear view of the qrx212 module qrx212 modules slide into the rx12 with the arrow pointing to the top of the rx12 fastening screws with the arrow on the qrx212 module pointing to the top of the rx12 gently insert the qrx212 into ...

  • Page 8

    Zaxcom rx12 home screen 8 home screen explained the home screen is divided into six sectors, one sector for each qrx 212module. Each sector will display the following information: frequency - the current selected frequency will be displayed for each receiver. If the module is in dual mode both frequ...

  • Page 9

    Zaxcom rx12 system menu 9 system menu to access the system menu press the menu encoder knob. Receiver configure menu the receiver configure menu is where each of the 6 qrx212 receiver modules are be set up from. To access the receiver configure menu press the star key from the home screen. Or select...

  • Page 10

    Zaxcom rx12 system menu 10 unit code this is where the zaxnet unit code for each module is set. The unit code on each qrx212 receiver must match the unit code set in the trx transmitter so that remote frequency and gain commands can be sent to the proper transmitter. Each receiver and transmitter pa...

  • Page 11

    Zaxcom rx12 system menu 11 scan menu from the scan menu is where the rx12 can search the spectrum to determine what rf is present. This will aid in finding a clear operating frequencies. After a scan the rf that is present will be represented in the graph by a series of vertical lines extending from...

  • Page 12

    Zaxcom rx12 system menu 12 frequency list / auto-pick this page displays the current chosen frequency of each receiver module. If a module is set to dual mode both frequencies will be displayed. From this page frequencies can be selected so auto-pick can change the frequency of any receiver(s). How ...

  • Page 13

    Zaxcom rx12 system menu 13 settings menu fan speed the rx12 has an adjustable cooling fan on the bottom of the unit. The fan can be turned off or adjusted from 1 through 10 with 10 being the highest setting. Lcd brightness the lcd screen and backlight key board is adjustable; this menu allows for br...

  • Page 14

    Zaxcom rx12 system menu 14 recall factory defaults from this menu the rx12 can be reset to the factory default setting. Zaxnet frequency control when enabled the rx12 will send frequency and gain change commands, via zaxnet to the corresponding trx transmitter when the gain or receiver frequency is ...

  • Page 15

    Zaxcom rx12 pin configuration 15 rx12 connector assignments single analog channel out of one ta5 ta5 out on rx-12 xlr into mixer pin 1 pin 1 (ground) pin 2 pin 2 ( + ) pin 3 pin 3 ( – ) pin 4 no connection pin 5 no connection two analog channels out of one ta5 ta5 out on rx-12 xlr into mixer pin 1 p...

  • Page 16

    Zaxcom rx12 pin configuration 16 serial connector (usb rs-485) to nomad or qrx rx12 nomad or qrx white (txp) red (rxp) green (txm) black (rxm) red (rxp) white (txp) black (rxm) green (txm) to ifb200 or trx900 camera link (usb rs-485 to ta5f) rx12 ifb200 or trx900cl red (rxp) no connection white (txp...

  • Page 17

    Zaxcom rx12 firmware update 17 updating the rx12 firmware each rx12 is shipped with the latest firmware version installed. When newer firmware becomes available, it can be downloaded from the zaxcom website: http://www.Zaxcom.Com/software-updates newer version of beta software may be found on the za...

  • Page 18

    Zaxcom rx12 product support 18 product support register your product with zaxcom: http://zaxcom.Com/support/product-registration/ download the latest firmware from: http://zaxcom.Com/support/updates/ download the latest user manuals from: http://zaxcom.Com/support/updates/ submit technical questions...

  • Page 19

    Zaxcom rx12 specifications 19 zaxcom rx12 specifications frame specifications analog audio output balanced 0db @-20dbfs (2 channels receiver) digital audio output aesebu (2 pair per receiver) audio connectors 6 - ta5m rf connectors 4 sma including loop trough rf impedance 50 ohms rf gain input-outpu...

  • Page 20

    20 zaxcom warranty policy and limitations zaxcom inc. Values your business and always attempts to provide you with the very best service. No limited warranty is provided by zaxcom unless your rx-12“product” was purchased from an authorized distributer or authorized reseller. Distributers may sell pr...

  • Page 21

    21.

  • Page 22

    22 fcc notice: note: this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The equipment generates u...